Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Low range won't engage

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 146
Joined: Fri May 21, 2004 2:07 pm
Location: Sydney North

Low range won't engage

Post by Brunsy »

Tried to engage 4L this arvo and the box just wont do it. Its a GQ SWB petrol and AUTO, I have just had the auto recoed less than 20 thousand kays ago. Makes a bloody awfull grinding of gears on the way thru from 2H down to 4L. I have spaced the gearbox down about 20mm to correct the tailshaft angle since fitting my 50mm raised springs, could this be the problem. I got this car from my old man and he has never shifted it from 2H in the 250 thousand kays he had it.
Any help????
GU TB45 tractor
Top
Posts: 782
Joined: Tue Mar 08, 2005 12:03 pm
Location: brisbane

Post by giantracing »

transfer case stick is hitting the floor pan because of the gearbox packers.
build em tuff, drive em ruff.........

Custom 4wd Creations Brisbane
0438279890
Top
Posts: 485
Joined: Wed May 05, 2004 8:04 am
Location: parramatta

Post by viperguy »

spot on diagnosis..does the vehical have a body lift? as this will add to the problem also.
Top
Posts: 146
Joined: Fri May 21, 2004 2:07 pm
Location: Sydney North

reply

Post by Brunsy »

No body lift, but makes sense, just read a thread on how to modify the tunnel surround. What do you make of the grinding as I go from 2H to 4H i never really had this in my manual LWB only noticed it in this vehicle.
cheers brunsy.
GU TB45 tractor
Top
Posts: 485
Joined: Wed May 05, 2004 8:04 am
Location: parramatta

Post by viperguy »

mine grinds to if the shift isnt a direct, one movement shift if u get what i mean. i tend to turn car of and shift then turn car back on if i get too much grinding. dunno why it happens or how to stop it though. everything works fine though
Top
Posts: 782
Joined: Tue Mar 08, 2005 12:03 pm
Location: brisbane

Post by giantracing »

because it is auto you have to stop , turn car off and change from high 2 and 4. because you dont have a clutch to release drive
build em tuff, drive em ruff.........

Custom 4wd Creations Brisbane
0438279890
Top
Posts: 146
Joined: Fri May 21, 2004 2:07 pm
Location: Sydney North

sorted

Post by Brunsy »

Thanks fellas everything works now,
cheers Brunsy
GU TB45 tractor
Top
Posts: 1489
Joined: Wed Jan 21, 2004 4:13 pm
Location: Brisbane South. QLD

Post by G_loomis »

ummm silly question...but couldnt you just put it in nuetral instead of turning the ignition off. that way it would be out of drive.
L.S Canvas & P.V.C
www.lscanvas.com.au
Top
Posts: 613
Joined: Fri Oct 21, 2005 9:33 pm
Location: virginia, brisbane

Post by ausoops »

i can shift from 2 to 4h whilst on the move and only need to stop to go into low range (auto in N) no grinding
Top
Posts: 775
Joined: Tue Mar 18, 2003 8:10 pm
Location: under the wifes thumb

Post by zookjedi »

ausoops wrote:i can shift from 2 to 4h whilst on the move and only need to stop to go into low range (auto in N) no grinding
same here as long as your in neutral or park and move the stick in one direct motion low range won't grind either .
if its worth doing do it intensly , better still do it with MADPASSION

set your limits way beyond your abilities
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

giantracing wrote:because it is auto you have to stop , turn car off and change from high 2 and 4. because you dont have a clutch to release drive
Ummmmm...... Im like the others, can change H4 to 2wd on the move.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 3 guests