Someone maybe able to shed some light for me.
After a weekend of wheeling i have now developed a clunk in the front end as i turn left then when i turn back to the right it clunks again as if something is shifting from side to side. I had a sticky couldn't see anything wrong, so would appreciate any ideas on what i may have over looked.
Thanks.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
gq clunk
gq clunk
Little old patrol with a little old diesel. Driven once a week to church, never been offroad.
I promise.
I promise.
when my panhard went ,it didnt make any noise when i turned the wheels left to right , when i started to accelerate up at a cedertain speed the whole front end shuddered so bad i thought the wheels were falling offozy1 wrote:a rought guess woulod be panhard, either bushes, or if you have an adjustable item, maybe the lick nut is loose, but there can be alot of areas it might be coming from,
do you have an aftermarket steering wheel and boos kit?
thats how i knew it was my panhard
1995 land rover disco on 265 muddies
Check your Body mount. It has a bit or rubber around where it fits into the chasis. They have been known to wear out and start clunking. They did on mine after a trip offroad. The other thing it could be is the floor pan where it meets the fire wall, Patrol's sometimes seperate there if used offroad.
[size=167][color=red]Have Fun, Play Hard, Be Safe[/color]
[color=green]Paul[/color][/size]
[size=75][color=blue]GQ LWB, Lockers, 36" Simex, High mount with Plasma, Turbo, 5" lift[/color][/size]
[color=green]Paul[/color][/size]
[size=75][color=blue]GQ LWB, Lockers, 36" Simex, High mount with Plasma, Turbo, 5" lift[/color][/size]
patrolpaul wrote:Check your Body mount. It has a bit or rubber around where it fits into the chasis. They have been known to wear out and start clunking. They did on mine after a trip offroad. The other thing it could be is the floor pan where it meets the fire wall, Patrol's sometimes seperate there if used offroad.
i also have a shutter in the drive train when i am cruising between 90k and 100k could this be my auto trans or tailshaft i have been told to check both
so you think the shutter will go away if i lower the auto trans 1 inch or does it have to be lowered to suit my lift kit. also what do i do to lower the trans can youtell mematthewK wrote:it common in the LWB with large lift kits to get shudder/viration in the gear box its as simple to lower the whole gear box 1inch ,GQ again wrote:patrolpaul wrote:Check your Body mount. It has a bit or rubber around where it fits into the chasis. They have been known to wear out and start clunking. They did on mine after a trip offroad. The other thing it could be is the floor pan where it meets the fire wall, Patrol's sometimes seperate there if used offroad.
i also have a shutter in the drive train when i am cruising between 90k and 100k could this be my auto trans or tailshaft i have been told to check both
i know this because a mate of my old mans in sydney had a 6inch lift put in by TJM they lowered the gear box 1 inch to stop vibrations in it
dose that make any sences to ya?>
You can make or buy spacer blocks that fit between the chasis and transmission cross member. Has to how much it would depend on how much lift you have.
[size=167][color=red]Have Fun, Play Hard, Be Safe[/color]
[color=green]Paul[/color][/size]
[size=75][color=blue]GQ LWB, Lockers, 36" Simex, High mount with Plasma, Turbo, 5" lift[/color][/size]
[color=green]Paul[/color][/size]
[size=75][color=blue]GQ LWB, Lockers, 36" Simex, High mount with Plasma, Turbo, 5" lift[/color][/size]
funny, only ever heard of that with shortys.matthewK wrote: it common in the LWB with large lift kits to get shudder/viration in the gear box its as simple to lower the whole gear box 1inch
is this the same old man with a 6+in lift and no longer brake lines?i know this because a mate of my old mans in sydney had a 6inch lift put in by TJM they lowered the gear box 1 inch to stop vibrations in it
dose that make any sences to ya?>
After I fitted the spacer it was gone. bogged wrote:funny, only ever heard of that with shortys.matthewK wrote: it common in the LWB with large lift kits to get shudder/viration in the gear box its as simple to lower the whole gear box 1inch
is this the same old man with a 6+in lift and no longer brake lines?i know this because a mate of my old mans in sydney had a 6inch lift put in by TJM they lowered the gear box 1 inch to stop vibrations in it
dose that make any sences to ya?>
yeah the same guy only reason i think he didnt touch the brake lines and other things hehehe funny i forgot to mention that he had an 8inch lift in it befor he went to 6 inch , and i was told they lowered his gear box 1 inch to stop vibrations in his 1990+ LWB patrol
no wonder i looked the idiot on yahoo when i only had half the story so my apologys to you bogged and to other who was on there
1995 land rover disco on 265 muddies
Maybes
Check rubber spring pads. Coil can move in the seat. Clark rubber may have some rubber sheet that you can make new ones out off.
Tie-rod - I bent this (steering arm that goes from passenger side rear of swival hub to the drivers side- ie makes drivers side turn). Bent it on a smallish rock. Then when turning or suspension was cycling, it would hit the sump (Morks thats what caused the dint). Fix get a new one or straighten the old.
Panhard bushes- Usually causes a virbration in the front end (mine was bad under brakes). Dont usually notice it while turning as it will have a constant sideways load.
TieRodEnds (TRE)- Dunno never killed one.
Steering box may have slack in it. But I would think that while it has load on it, it would be fine. And it would have teh clunk in both directions.
Body mounts- Hell we give them shit off-road. They wear out theres dodgy fixes, JUst buy new ones there good for a couple of hundred thousand k's. They tend to make more of a clunk when wet. Can notice it thru the floor. Also they may not be worn. May have broken a bolt or be loose. Stick the rattle gun on the bugger.
Body sometimes cracks at the bottom of the firewall. And can make a clunking sounds.
Check rubber spring pads. Coil can move in the seat. Clark rubber may have some rubber sheet that you can make new ones out off.
Tie-rod - I bent this (steering arm that goes from passenger side rear of swival hub to the drivers side- ie makes drivers side turn). Bent it on a smallish rock. Then when turning or suspension was cycling, it would hit the sump (Morks thats what caused the dint). Fix get a new one or straighten the old.
Panhard bushes- Usually causes a virbration in the front end (mine was bad under brakes). Dont usually notice it while turning as it will have a constant sideways load.
TieRodEnds (TRE)- Dunno never killed one.
Steering box may have slack in it. But I would think that while it has load on it, it would be fine. And it would have teh clunk in both directions.
Body mounts- Hell we give them shit off-road. They wear out theres dodgy fixes, JUst buy new ones there good for a couple of hundred thousand k's. They tend to make more of a clunk when wet. Can notice it thru the floor. Also they may not be worn. May have broken a bolt or be loose. Stick the rattle gun on the bugger.
Body sometimes cracks at the bottom of the firewall. And can make a clunking sounds.
THOUGHT FOR THE DAY....
Who is online
Users browsing this forum: Bing [Bot] and 0 guests