Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

D300 Transfer case.

Tech Talk for Jeep owners.

Moderator: GUtripper

Post Reply
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

D300 Transfer case.

Post by bj on roids »

Apparently, the best thing Jeep ever did was install a Dana 300 T-case. But thats another argument ;) In my quest to find one I came across a cheap Dana 20, but had a distinct lack of interest.

I saw one for $1000 and nearly fell over. I could buy a whole hilux for that!!

What do these things retail for in driving condition?? Anybody local got the 4:1 gears?

I was offered a US one needing rebuild for US$600 with 4:1s.

I am not installing one, just thinking about it at the moment. Not like I would tell you guys anyways, Wooders, gives me enough lip as it is!! ;)

But serious pros and cons if you have any would be welcomed, along with prices and so forth! Cheers

rob
hands and mums dont count!!!
User avatar
Ben
Posts: 4434
Joined: Thu Nov 28, 2002 3:25 pm
Location: Melbourne

Re: D300 Transfer case.

Post by Ben »

bj on roids wrote:I saw one for $1000 and nearly fell over. I could buy a whole hilux for that!!


Dad always told me you get get what you pay for! :D :D
Apparently people think I'm too patronising (that means I treat them like they’re stupid).
Posts: 1544
Joined: Tue Oct 22, 2002 8:37 am
Location: Performing booty fab in my Garage

Re: D300 Transfer case.

Post by Wooders »

bj on roids wrote:I saw one for $1000 and nearly fell over. I could buy a whole hilux for that!!


Yeah but that's ALLL the entire HiLux is worth (in good cond ;))....
You can get them cheaper - but becuase they are so rare out here you'll pay a bit of a premium....or get stung by our crappy xrate.....
Try the Jeep Wreckers Mascot Motors (Nowra) or Hunter Spares (lemon Tree Passage)
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Posts: 384
Joined: Sun Oct 20, 2002 8:26 pm
Location: Springfield/ QLD

Post by CJer »

BJ i am running a Dana 300 with Teralow 4:1 gearset in it.

The ratio has made a HUGE diff to mine. The transfer is spose to be one of the toughest jeep uint there is.

I paid $625 USD for the 4:1 kit from www.trailquest.com, but was quoted
$2800 AUD from USA 4X4 in Melb.

$600 with the 4:1 as long as it is not one of the realy one kits ( that had some problems) it would be a reasonable buy.


Jamie
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

thanks for the info guys.

Jamie, you dont want to sell yours huh? ;) Have you done the FWD mod?
hands and mums dont count!!!
Posts: 571
Joined: Tue Nov 19, 2002 3:56 pm
Location: New York

Post by zzzz »

get onto hammond.
they were mentioning bringing in 14 of the suckers from the US a while ago when I asked.

Don't know if it every happened.
They also mentioned AUS$700 which is pretty steep as they sell for US$50-200 all day long in the states.

Maybe look for an np205 or something instead....might be easier to get at the ford wreckers around.

cheers

z
Posts: 384
Joined: Sun Oct 20, 2002 8:26 pm
Location: Springfield/ QLD

Post by CJer »

bj on roids wrote:Jamie, you dont want to sell yours huh? ;) Have you done the FWD mod?


No FWD mods yet. my front shaft is trashed so after i get that done and index the transfer i will look at it
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest