Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
maruti gearbox conversion
maruti gearbox conversion
i've been told that a 1l maruti 4 speed can be converted to a 5 speed does anyone know if this is possible and if so how to do it
yes its possible.
I did it to mine.
The maruti 4sp a;ready has a 5sp main shaft. You will need a 5th gear and selector from a sierra 5sp.
You will also need a 5sp main shaft bearing for the end of the maruti box.
Machine the bearing housing out at the end of the main shaft to suit the 5sp bearing, and fit the 5th gear and selector.
The box will not require any machining to fit the gear.
Prolly a good idea to replace all the bearings in the box while you are there. If you need a machine shop to do the work for you, this exercise may cost you upwards of 5 or $600, and at the end of the day, you will still have to down change on hills, cos the 1 litre has no poke at all
I love my 4sp. Every morning I sit on the hyway doing upwards of 120kph ( off the speedo dial ) for 10-15 mins to get to work.
Nothing like 5000rpm in a 1 litre to wake you up in the morning
I did it to mine.
The maruti 4sp a;ready has a 5sp main shaft. You will need a 5th gear and selector from a sierra 5sp.
You will also need a 5sp main shaft bearing for the end of the maruti box.
Machine the bearing housing out at the end of the main shaft to suit the 5sp bearing, and fit the 5th gear and selector.
The box will not require any machining to fit the gear.
Prolly a good idea to replace all the bearings in the box while you are there. If you need a machine shop to do the work for you, this exercise may cost you upwards of 5 or $600, and at the end of the day, you will still have to down change on hills, cos the 1 litre has no poke at all
I love my 4sp. Every morning I sit on the hyway doing upwards of 120kph ( off the speedo dial ) for 10-15 mins to get to work.
Nothing like 5000rpm in a 1 litre to wake you up in the morning
[url]www.twinstickoffroad.com[/url]
1lt 5 speed
I have a 1lt 5speed conv box in a lwb that I would sell for what I paid for it. Done 76km since i got it , then spat engine. Just sat since. Any takers. Comes with jack shaft and mounts to bolt straight on. pm me.
Who is online
Users browsing this forum: No registered users and 1 guest