Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Turbo 4runner dynoed today
Moderators: toaddog, Elmo, DUDELUX
Turbo 4runner dynoed today
Got the guys at tuning turbo centre at the gabba to tune me 4runner. I had a real cheap boost controller on, which i thought was running 12, but it was supposed to be spiking up to 18psi. So stay away from the cheap sh#t. He tinkered with the pump and put a new boost controller on. Once he put the different controller on and fixed the pump i got an extra 25 hp at the wheels.
I run 33x12.5's and got 86hp at the wheels and 444nM of torque. Possibly more if i get the injectors changed.
It goes heaps better
Anyone else got and turbo diesel dyno figures????
I run 33x12.5's and got 86hp at the wheels and 444nM of torque. Possibly more if i get the injectors changed.
It goes heaps better
Anyone else got and turbo diesel dyno figures????
cost for dynoed
it cost 300 for the tune and dyno, but because i had to put a new boost controller on it was 420 all up. But well worth it
see john on nile st the gabba
see john on nile st the gabba
Brisbane tuning know their stuff, they dynoed and tuned my surf for me a few years ago as well as putting on a 3" dump and 2.5" exhaust, John really knows his stuff, and I got close to 80hp at the rear wheels ! and heaps more tourque I think it was around 400/420nm, i've got the dyno report somewhere.
Just wish I wasn't selling it now
Cheers
Dan.
Just wish I wasn't selling it now
Cheers
Dan.
Twisted by Design
Not a turbo desiel, but it is a 4runner....heres my dyno results for the last phew years from the Dyno Shootout at the EXPO weekend at LCMP.
First Dyno at Cruiser in 2003 - 3.0l V6, K&N, Extractors, Twin 2" system, no cats - 61 HP
2004 - 3.0l V6, WOLF 3D Engine Management, Std. Exhuast Headers, 3" Mandrel Bent Exhuast, Pod Filter - 74 HP (Got 2nd place in the under 3.8l petrol class)
This Year - 4.0l Lexus V8, Std. Computer, Std. Headers, Std. Intake, Twin 2.5" exhuast into twin 3" cats, then single 3" Mandrel - 146HP
First Dyno at Cruiser in 2003 - 3.0l V6, K&N, Extractors, Twin 2" system, no cats - 61 HP
2004 - 3.0l V6, WOLF 3D Engine Management, Std. Exhuast Headers, 3" Mandrel Bent Exhuast, Pod Filter - 74 HP (Got 2nd place in the under 3.8l petrol class)
This Year - 4.0l Lexus V8, Std. Computer, Std. Headers, Std. Intake, Twin 2.5" exhuast into twin 3" cats, then single 3" Mandrel - 146HP
2012 FJ Cruiser
1984 BJ42 - Stretched and Coilovered
1977 HJ45
1984 BJ42 - Stretched and Coilovered
1977 HJ45
Twisted by Design
No offence taken at all. All those were on the dyno at Landcruiser Park, which is known for being down on horsepower figures....but its the only one that I can use to get a comparision between different years and modifications. It shows that I've got more than a 100% increase in Hp at the wheels from the original V6 setup.
Heres is the dyno report from widowmaker who mounted my engine for me. Almost 150kw at the wheels...with 33's on!!! Click image below for full size...
The calculted flywheel power was 189kw....1kw shy of the factory output for the motor.......so I'm more than happy with the V8 swap, and don't regret one bit of it.
Heres is the dyno report from widowmaker who mounted my engine for me. Almost 150kw at the wheels...with 33's on!!! Click image below for full size...
The calculted flywheel power was 189kw....1kw shy of the factory output for the motor.......so I'm more than happy with the V8 swap, and don't regret one bit of it.
2012 FJ Cruiser
1984 BJ42 - Stretched and Coilovered
1977 HJ45
1984 BJ42 - Stretched and Coilovered
1977 HJ45
dynoed 4runner
I have a 2.8 diesel from a 1996 model lux. Went average without turbo, then put an aftermarket denco kit and know its awesome.
I will be selling car at end of year cos i am after a dual cab lux 90 - 97 solid axle. Not sure whether to sell the 4runner with the turbo or without and keep it for the dual cab.
What sort of money do you think i should ask for it with and without turbo.
some specs.
1984 4runner. 33 tyres, 4 new long travel procomp shocks, ext brakelines, ifs rears with lift blocks, 2inch raised front springs with superior extended shackles. 2.8 turbo diesel. 5speed. cd player etc.
any sort of suggestions would be great
I will be selling car at end of year cos i am after a dual cab lux 90 - 97 solid axle. Not sure whether to sell the 4runner with the turbo or without and keep it for the dual cab.
What sort of money do you think i should ask for it with and without turbo.
some specs.
1984 4runner. 33 tyres, 4 new long travel procomp shocks, ext brakelines, ifs rears with lift blocks, 2inch raised front springs with superior extended shackles. 2.8 turbo diesel. 5speed. cd player etc.
any sort of suggestions would be great
Who is online
Users browsing this forum: No registered users and 111 guests