Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Getting Sliders made..

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 149
Joined: Sat Sep 11, 2004 2:27 pm
Location: brisbane

Getting Sliders made..

Post by stewie81 »

Hey guys I am Wanting to get some sliders made for My MAV But don't really wanna pay $900 there asking in shops..
I don't have access to metal working Gear (welder ect..)

Question is would any body be willing to Make some Sliders up for me? Obviously I would buy Materials and pay for time ect..

How much wouldi be looking at? And would any one be interested.
I am in brisbane... And will be looking at getting something done hopefully within the month..


Cheers
Stewie
Top
Posts: 269
Joined: Thu May 06, 2004 2:51 pm
Location: Brisbane, Southside

Contact:
Contact suzukiboy

Post by suzukiboy »

Try On Track 4WD at Slacks Creek I am sure if you say you have a budget they can work someting out.
Suzuki Vitara JX 1.6 EFI Hardtop.
Calmini Lift, Rockhopper, Skid Plates, ARB Airlocker, Bullbar, 30" MTR, Custom Sill Sliders, Rear Bar.
See my pics
http://community.webshots.com/user/suzukiboyoz
Top
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Post by sierrajim »

Price is generally a reflection of quality, save up some extra cash and buy/make a good set. Especially when they will cop an absolute flogging.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Top
User avatar
TWISTY
Twisted by Design
Posts: 2607
Joined: Tue Jul 15, 2003 12:52 pm
Location: Sunshine Coast QLD

Contact:
Contact TWISTY

Post by TWISTY »

You could try Kane at Komited Kustoms 0410 406 792, but he's up on the Sunshine Coast. He made my sliders which come up great!!! I'm sure he could do them for a fair bit less than $900....
2012 FJ Cruiser
1984 BJ42 - Stretched and Coilovered
1977 HJ45
Top
Posts: 1719
Joined: Sun Jan 25, 2004 11:45 am
Location: Brisbane

Contact:
Contact RV80

Post by RV80 »

Pm 80lsy gq on this board he makes sliders etc and is in Brisbane.
www.bolsys.com.au
Top
Posts: 81
Joined: Fri Aug 13, 2004 9:42 am
Location: Canberra

Post by P_Byrne »

Try Custom Off Road in Stafford.

They specialise in vee dubs, but made me a great tube bar and slider set for my zook.

Reasonable price and great work.

Cheers,
Paul
90 WT Tin Top - Stock noisemaker and gears :(
Top
Posts: 2001
Joined: Wed May 26, 2004 9:47 pm
Location: sydney

Contact:
Contact runnin4life

Post by runnin4life »

P_Byrne wrote:Try Custom Off Road in Stafford they specialise in vee dubs
with a name like that u wouldnt think it to be so
Top
Posts: 693
Joined: Sun Sep 26, 2004 2:37 pm
Location: Rochedale South - Brisbane

Post by benhl »

Spoken to Custom Off road b4 and they're still pretty exey. Try 80lsy GQ. He is good at this i hear.
GU 4.2 TD Garrett BB Hi-flow, M8274 + Bells & Whistles with plenty of fruit still on the list!
[b][color=red]\ m / ( > . < ) \ m /[/color][/b]
Top
Posts: 2
Joined: Sat Mar 18, 2006 3:32 pm
Location: townsville

Post by bundy 85 »

give greg a call at brodie built on (07)2309 7542, you might still be paying about the same price but he does quality work
Top
Posts: 627
Joined: Sun Mar 27, 2005 7:51 pm
Location: Sydney

Post by guzzla »

the day i started making sliders for my truck, my mig suffered terminal meltdown. by the time i finished them i had super strong sliders, a new 170amp stick welder and a new 15in makita metal docking saw all for under a $800.

my point is it may be easier to justify spending the money if you get something to mod other stuff as well. ive since made a front tube bar a twin rear wheel carrier/bar all for cost of materials only.

im a chippy by trade and self taught on the welder, you just gotta take your time ask quetions and in the end you get what you want not what they give you. more rewarding also when you can tell someone you did it yourself.
IF IT MOVES, SHOOT IT
IF IT DOESNT, CUT IT DOWN
IF ITS GREEN, PISS ON IT
Top
Posts: 1284
Joined: Tue Mar 22, 2005 12:31 pm
Location: forest lake BUILDING BOOTYFAB BARWORK

Post by frp88 »

how big is your garage it isn't as hard as you think i made mine out of leftovers the hard bit is to mount them.I didn't want weld them to the chassis so i made brackets which clamp around it so it can come off :D
LETS GO BRONCOS
Top
Posts: 1363
Joined: Tue May 13, 2003 10:54 am
Location: Scarborough, Qld

Post by bigbluemav »

Ring Mick from Hard Core 4x4 (No. in my sig line). him and his business partner Brett do awesome bar work. Check out the bar work on their 80's and the bob tray on Mick's dual cab 80.

They're located at Elimbah, just out of Caboolture.


Regards
Big Dave, Scarborough, Qld
Loose Screws 4wd Racing Team
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests