Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Very cool, that is a massive job u have started, hope it turn out well
How did u line up the 3rd member with the diff centre so the axles will be straight (both front to back and up and down), I imagine if it is the slightest bit out at the centre, it will be way out buy the time u reach the hubs. Have u got some special tools u are using, or jigs u have made up?
There is jigs, at this point though we stil have some play.
I have a 2m length of 45mm 4140 to use as an alignment bar to go the whole way though and have a modified 3rd member which also accepts this through where the bearings useually sit.
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!
