Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
XRCC News and Pics
Moderators: toaddog, TWISTY, V8Patrol, Moderators
green cruiser
is there any reason his tyres are on the wrong way round or is that the way that brand go?antt wrote:green cruiser that was doing pretty good (i think it broke a cv this arvo)
Antt ya mug, you didn't come over and say G'Day?? We were all wondering where you were when Sam busted his axles, they wanted to "borrow" some bits off your rig
Good pics, there should be some good ones from today, plenty of action and some great driving.
The Fat 40s flopped it today on stage3 at the last gate. POS blew his front pinion (I think) on stage 3 and had to drive the last stage in rear wheel drive. He basically lined it up, and gunned it, crowed loved it, was a great finish for the day
Good pics, there should be some good ones from today, plenty of action and some great driving.
The Fat 40s flopped it today on stage3 at the last gate. POS blew his front pinion (I think) on stage 3 and had to drive the last stage in rear wheel drive. He basically lined it up, and gunned it, crowed loved it, was a great finish for the day
hey all
i have some great pis from sat.i was right in front of pos roll over(ive got 3 pics in series of roll over)....some good ones of the strangerover in action....and a couple of MR overkill in action and on the rock.also a couple of the 40 series and the green beast.
the only prob is i can never get them on any site i still have to
put them on the pc..........can i e-mail them to someone to put on.
i have some great pis from sat.i was right in front of pos roll over(ive got 3 pics in series of roll over)....some good ones of the strangerover in action....and a couple of MR overkill in action and on the rock.also a couple of the 40 series and the green beast.
the only prob is i can never get them on any site i still have to
put them on the pc..........can i e-mail them to someone to put on.
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Got a call from HYPOLUX that was up there spectatin apparently awesome comp again aswell as awesome carnage and a lot of bush repairs like sleevin axles and then weldin up and competin for the rest of the comp (overkill) i think ben also mentioned something bout the semmens dude doin a pinion (or part of ) weldin it up and finishing aswell.....................
Now just gotta wait for him to get home so i can get my new (old ) 4.6's
Now just gotta wait for him to get home so i can get my new (old ) 4.6's
A1MAV wrote:Got a call from HYPOLUX that was up there spectatin apparently awesome comp again aswell as awesome carnage and a lot of bush repairs like sleevin axles and then weldin up and competin for the rest of the comp (overkill) i think ben also mentioned something bout the semmens dude doin a pinion (or part of ) weldin it up and finishing aswell.....................
Now just gotta wait for him to get home so i can get my new (old ) 4.6's
A1MAV
Yeah mate we blew a GU CV,Left rear trailing arm and rear pinion.
Paul the driver put in new cv in,whilst i welded and braced the trailing arm and welded the pinion back together. then finished the weekend.
Bloody awsome weekend..
Jamie
Team 4x4 Specialist 005
Proudly Sponsorsed By
WWW.MAXXIS.COM
WWW.STAUNPRODUCTS.COM
COUNTRY WIDE MECHANICAL
Thanks to
WWW.OPW.COM.AU
WWW.DOBBINENGINEERING.COM
Proudly Sponsorsed By
WWW.MAXXIS.COM
WWW.STAUNPRODUCTS.COM
COUNTRY WIDE MECHANICAL
Thanks to
WWW.OPW.COM.AU
WWW.DOBBINENGINEERING.COM
Who is online
Users browsing this forum: No registered users and 1 guest