Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Alternator wiring

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 18
Joined: Wed Oct 12, 2005 2:27 pm

Alternator wiring

Post by reggie »

Just wondering if someone could answer this for me.
I have just put in a 308 in my MQ patrol and am currently doing the wiring on the alternator. The alternator is a Bosch one and there are no model numbers or anything on it. There are 3 terminals, "B+" goes directly to the battery, "D+" goes to the charge warning light. The other connection is "+" and I have searched long and hard but can't seem to find any info. Can somebody tell me what it is and where it is wired to.
I'd be very happy if someone could.
Thanks.
Top
Posts: 603
Joined: Mon Nov 08, 2004 6:19 pm
Location: Mt Isa

Post by raptorthumper »

The other wire is the voltage sensing wire that regulates the voltage at 14.2 - 14.5 volts. It goes direct to the positive terminal of the battery.


_________________________________________________-
Top
Posts: 18
Joined: Wed Oct 12, 2005 2:27 pm

Post by reggie »

Thanks mate.
So is this still the case if the regulator is an internal type regulator?
Top
User avatar
mav
Posts: 320
Joined: Thu Jun 26, 2003 1:53 pm
Location: traralgon victoria

terminals

Post by mav »

the b+ terminal is a stud with a nut on it are the other two push on terminals??
see ya mav
Top
Posts: 18
Joined: Wed Oct 12, 2005 2:27 pm

Post by reggie »

Yep, the B+ has a nut on it, the D+ is a push on type male lug and the + is a push on round male lug.
Top
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

Um, I think the 3rd wire is not needed. I run mine with only the 2 wires and works fine. Just run it and see how it works with the 2 wires first.

Cheers
Top
Posts: 18
Joined: Wed Oct 12, 2005 2:27 pm

Post by reggie »

Thanks guys for your help. Will try it on the weekend.
Top
User avatar
mav
Posts: 320
Joined: Thu Jun 26, 2003 1:53 pm
Location: traralgon victoria

electric choke

Post by mav »

reggie wrote:Yep, the B+ has a nut on it, the D+ is a push on type male lug and the + is a push on round male lug.
i'd say the push on round male terminal is for an electric choke, it might put out a lower voltage.
see ya mav
Top
Posts: 73
Joined: Mon May 23, 2005 9:56 pm

alt wiring

Post by mgundle »

the extra + terminal is connected directly to the B+ terminal via the rectifer its for a plug-in suppressor on the alternator which can be plugged in there or with a eyelet on the B+ terminal the
terminal that would run a choke or tacho in some cases is labled W which is feed of one of the stator windings
hope this helps any one out there with bosch alt dramas
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 30 guests