Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

oil pressure on 4BD1T? in psi

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 1097
Joined: Wed Feb 16, 2005 5:07 pm
Location: brisvagas

oil pressure on 4BD1T? in psi

Post by def90 »

just wondering if anyone knows what pressure a 4BD1 Turbo (if thats makes much difference) should run in PSI?

mine runs 60psi then can drop down to 45 if going slow and off the gas.

i was told they should be up around 100 PSI!

is this correct?

unless i have a faulty gauge?
Top
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Post by Maggot4x4 »

Mine drops as low as 20 when at idle, about 80 when driving.
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
Posts: 1097
Joined: Wed Feb 16, 2005 5:07 pm
Location: brisvagas

oil

Post by def90 »

cheers maggot, as i am far from mechanically minded, do you think 60psi is 'below normal'? 20 psi seems a fair difference...
Top
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Post by Maggot4x4 »

I would of thought 60-80 was about the norm. You don't have as much variance as me, but I run my idle fairly low.

Try asking here they may know more

http://clubisuzu.proboards29.com/index.cgi

or here

http://www.4x4wire.com/forums/postlist. ... oard=UBB74
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
Posts: 1097
Joined: Wed Feb 16, 2005 5:07 pm
Location: brisvagas

psi

Post by def90 »

will do cheers maggot
Top
Posts: 71
Joined: Fri Dec 19, 2003 9:58 am
Location: Mont Albert, Melbourne

Post by isuzu110 »

For what it's worth, my Isuzu 4BE1 NA runs 70 PSI on the highway
Rod

'85 110, LT-95, 4BE1 Isuzu & Rear Maxi
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests