Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Problem with transfer case on NJ Pajero

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 47
Joined: Sun Oct 10, 2004 7:01 am
Location: Berwick Victoria

Problem with transfer case on NJ Pajero

Post by Dash007 »

G'Day all, I have a 94 Pajero.
My problem is that when I am in low 4 going up hill it is fine but when i'm coming down in low 4 it wants to pop out of low :cry: .
Can anyone help me ? Or what would a 2nd hand 1 cost ?
Cheers Dash.
Ps this is a great site :P .
You do not have the required permissions to view the files attached to this post.
Top
Posts: 201
Joined: Wed May 12, 2004 11:51 am
Location: Geraldton, Western Australia

Post by Adomw »

-7

I reckon it's the transfer lever is being pushed back by the console/ tranie tunnel - could happen if you've done a body lift or your gearbox mounts are stuffed

Ado
JK Unlimited Rubicon
2" lift
Dual locked, 1:4 crawler gears, swaybar disconnect
Stock and loving it
Mods to come
Top
Posts: 1046
Joined: Sun Dec 12, 2004 11:24 pm
Location: ACT

Post by Zute »

The car is 12 years old, might be time for a bit a ajustment. ;)
'2001 Disco td5
'90 Maruti Ute 1Ltr Lwb

Experience is something you don't get, until just after you need it.
Top
Posts: 47
Joined: Sun Oct 10, 2004 7:01 am
Location: Berwick Victoria

Post by Dash007 »

Zute wrote:The car is 12 years old, might be time for a bit a ajustment. ;)
What do you mean? Adjust what? Or should I send it to Pajero heaven?
If at first you don't succeed, go faster.
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

mine does the same thing occasionally.
i think it could be the mounts as mine dont look too healthy.
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 1046
Joined: Sun Dec 12, 2004 11:24 pm
Location: ACT

Post by Zute »

Theres a whole heap of parts that could be worn in the selector. But if you have it fixed it should be good for another 12years.
'2001 Disco td5
'90 Maruti Ute 1Ltr Lwb

Experience is something you don't get, until just after you need it.
Top
Posts: 161
Joined: Mon Jan 06, 2003 4:46 pm
Location: USA

Post by Lordtrunks »

there is a pin in the shifter rail it may be to far in or not far enough in it happened to a guy here after his tranny was rebuilt you can see the pin if you pull the cover off the top of the t-case were the shifter goes in.
89 3.0 2dr auto, locked, tbars cranked,2"BL, 35's rollbar no top aisin hubs
Top
Posts: 47
Joined: Sun Oct 10, 2004 7:01 am
Location: Berwick Victoria

Post by Dash007 »

I shall give these a go on weekend and let you no how i go :cool:

Cheers Dash.
If at first you don't succeed, go faster.
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 1 guest