Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
MQ/MK headlight switch Question
MQ/MK headlight switch Question
Alrighty then, when I bought the 84MK Petrol Patrol for the Hummer convertion it was missing the indicator/wiper/headlight assembly on the steering column, I got 2, one from a petrol and one from diesel, which have the same wiring clips on the back, but the wiring from my loom is different for the lights, mine has 6 small clips, the assembly's I got have 5 big clips, the question is, what does the 6th wire on my do??, I was going to marry my wires to the clip with 5 big terminals, but I will have a spare wire then, any thoughts would be great, attatched is a pic of the 5 big pin assembly,
You do not have the required permissions to view the files attached to this post.
yup that is my guess...diesel was 24v and the petrol was 12v. I don't know how it was in Aus. but in most places around the world diesel MQ/Mk's are 24v. Some 12v diesels do exist but not many....Hoppy11 wrote:My loom seems to have 7 small pins, not 6, I think it could be a 24volt that has 5 pins and a 12 volt that has 7 pins ??
Maybe
Hoppy
www.rmp-o.com
In the seven pin there is 3 pins for power in, 1 for each head light out, 1 for the parkers out and 1 for the high beam relay.
I believe the 6 pin is the 24V switch as mine is 12V and its a seven pin.
use a multi meter to trace the cuircuit operation, but I believe the 24V switches had only one power in for headlights, but I don't know for sure.
I believe the 6 pin is the 24V switch as mine is 12V and its a seven pin.
use a multi meter to trace the cuircuit operation, but I believe the 24V switches had only one power in for headlights, but I don't know for sure.
In the seven pin there is 3 pins for power in, 1 for each head light out, 1 for the parkers out and 1 for the high beam relay.
I believe the 6 pin is the 24V switch as mine is 12V and its a seven pin.
use a multi meter to trace the cuircuit operation, but I believe the 24V switches had only one power in for headlights, but I don't know for sure.
I believe the 6 pin is the 24V switch as mine is 12V and its a seven pin.
use a multi meter to trace the cuircuit operation, but I believe the 24V switches had only one power in for headlights, but I don't know for sure.
Its all good, I went to the wreckers yard, they had heaps of Patrol assemby's, but they all had 5 pins, then I found one from a pulsar, identical to the patrol, and it had all the pins to suit my loom, it also has ajustable intermitted wipers, it bolted up and all plugged in perfect, just got to hook some wires for the ajustable intermitted wipers, YEA YEA
Hoppy.
so the pulsar and patrol share the same assembly.
Hoppy.
so the pulsar and patrol share the same assembly.
Who is online
Users browsing this forum: No registered users and 0 guests