Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GU Transfer case removel

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 601
Joined: Mon May 24, 2004 9:50 am
Location: south eastern melbourne

GU Transfer case removel

Post by GUEEY »

Looking at swapping transfer cases with a member from this sight.
My t/case with rockhoppers for his t/case without.
What is involved in removing a complete transfer case! and refitting.

Regards Grant.
GU III TD42T UFI18G Cross Country IC, 20 PSI. Neeeeeed mooooore Fueeeeeel.
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: GU Transfer case removel

Post by bogged »

GUEEY wrote:Looking at swapping transfer cases with a member from this sight.
My t/case with rockhoppers for his t/case without.
What is involved in removing a complete transfer case! and refitting.

Regards Grant.
Nuts, bolts, skin, bandaids, beers.
Top
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Contact:
Contact Wendle

Post by Wendle »

it's not too bad.
drain oils, drop tailshafts, pull handbrake cable through floor, unplug wiring, disconnect shifter linkage, unbolt from gearbox, drop crossmember (support t/case) and then slide it back off the gearbox.
it weighs just over 50kg, so two people makes it a lot easier.
Top
Posts: 469
Joined: Fri Sep 10, 2004 1:45 pm
Location: Melb

Post by sootygu »

Its good to see Bogged with such useful information again. :finger:


Easier if you remove the center console

Remove both tail shafts
Undo necessary wires and hand brake
Remove all the bolts between the g/box and transfer and they will seperate
No need to drain oils as they are both sealed

It is not a big job and will be easier with 2 people.

Cheers
You do not have the required permissions to view the files attached to this post.
Top
Posts: 29
Joined: Mon Jan 03, 2005 5:32 pm
Location: Melbourne

Post by ergjan19 »

Hey mate, I've got a 198 GU patrol and I am dropping my transfer case this weekend. I'll take some pics for you and post them on sunday or monday.

Barry
Top
Posts: 601
Joined: Mon May 24, 2004 9:50 am
Location: south eastern melbourne

Post by GUEEY »

ergjan19 wrote:Hey mate, I've got a 198 GU patrol and I am dropping my transfer case this weekend. I'll take some pics for you and post them on sunday or monday.

Barry
Cheers Barry that would be handy!
GU III TD42T UFI18G Cross Country IC, 20 PSI. Neeeeeed mooooore Fueeeeeel.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 58 guests