Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Cracked Bell House

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 67
Joined: Tue Jan 24, 2006 6:01 pm

Cracked Bell House

Post by Ippie »

Can anyone help to tell me what exactly this part calls?
Bell House of the front diff?

Do I need to replace the whole diff?
Or just the housing and may be the gear...

I don't know how to check the inside of it as I'm as good as you guys.

Umm, it happened yesterday......
You do not have the required permissions to view the files attached to this post.
1996 Vitara 2000cc V6 5drs
Top
User avatar
lay80n
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Contact:
Contact lay80n

Post by lay80n »

You have cracked to front diff centre carrier. Gonna need a new one sorry to say.
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Top
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

You may get away with just a new housing if you haven't damaged the ring & pinion. How did you do it? Too much right foot in reverse is a common cause. If you can find a steel housing from a manual V6 Grand Vitara (or a late '03 and on Auto V6 but make sure it is steel and not alloy) you shouldn't have any more problems again. You can also use a housing from the XL-7 but the crossmember mount is different so you would need to do a little fabricating to make it work.
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Top
Posts: 67
Joined: Tue Jan 24, 2006 6:01 pm

Post by Ippie »

Thx guys.
Hope I only need to steel housing and didn't damage the other parts...

Anywhere I can get the steel housing from?

Well, I was struggling to climb up from the bottom of a little vally.
The right front wheel was lifted in the air.
Since I don't have the air lock...
The wheel was spinning in the air then hit the ground.
So it stopped suddenly.
That's how it caused the problem I think...
I didn't know what exactly went wrong...
1996 Vitara 2000cc V6 5drs
Top
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

Ippie wrote: Since I don't have the air lock...
The wheel was spinning in the air then hit the ground.
So it stopped suddenly.
That's how it caused the problem I think...
I didn't know what exactly went wrong...
That'll do it.

Try a Wrecker. Failing that Suzuki spare parts can get them.
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Top
Posts: 67
Joined: Tue Jan 24, 2006 6:01 pm

Post by Ippie »

Umm, I don't have many wreakers in my area....
I'm thinking to get one from other places.
That's why I need to know what this part calls and any other models would fit to my 96 vit.....
1996 Vitara 2000cc V6 5drs
Top
Posts: 766
Joined: Mon Dec 30, 2002 3:08 pm
Location: Melbourne

Post by jtraf »

I got a couple of these in the garage minus ring and pinion if you are interested let me know......They are alloy not metal by the way but there are cheap....
Top
Posts: 67
Joined: Tue Jan 24, 2006 6:01 pm

Post by Ippie »

Thx!
Please check your e-mail!
I might need it from you!
1996 Vitara 2000cc V6 5drs
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: Bing [Bot] and 3 guests