carpet in the 4B

Post by **runnin4life** » Sun Apr 09, 2006 9:27 pm

hi all
im after some help in regards to making some carpet for my F20
it already got carpets but its worn through or faded or torn etc etc

i want to replace it but cant find moulded carpets or replacments short of going to a auto trimer i wouldl ike to have a crack at it

if any one has any links etc that could help it would be great
cheers
elliot

Post by **Beastmavster** » Sun Apr 09, 2006 9:50 pm

Carpet gets wet and smelly.

Why do you want carpet?

Hose out is the go.

Post by **runnin4life** » Sun Apr 09, 2006 9:56 pm

the key is to have press studs and make it into about 3 or 4 bits so i dont have to take the seats out etc and it will be a case off can be taken out easilly

cheers

Post by **45punkbus** » Sun Apr 09, 2006 10:31 pm

i have green shag pile carpet matts in the front of my troopy and the back is totally shagpile

Post by **bogged** » Sun Apr 09, 2006 10:33 pm

runnin4life wrote:hi all
im after some help in regards to making some carpet for my F20
it already got carpets but its worn through or faded or torn etc etc

i want to replace it but cant find moulded carpets or replacments short of going to a auto trimer i wouldl ike to have a crack at it

if any one has any links etc that could help it would be great
cheers
elliot

knox carpets in melb do moulded....
what part of planet are you in?

Post by **"CANADA"** » Sun Apr 09, 2006 10:33 pm

bogged wrote:
runnin4life wrote:hi all
im after some help in regards to making some carpet for my F20
it already got carpets but its worn through or faded or torn etc etc

i want to replace it but cant find moulded carpets or replacments short of going to a auto trimer i wouldl ike to have a crack at it

if any one has any links etc that could help it would be great
cheers
elliot
knox carpets in melb do moulded....
what part of planet are you in?

syd

Post by **bogged** » Sun Apr 09, 2006 10:34 pm

MADZUKI wrote:syd

email em...

Post by **"CANADA"** » Sun Apr 09, 2006 10:35 pm

45punkbus wrote:i have green shag pile carpet matts in the front of my troopy and the back is totally shagpile

funny....not living up to the name?

Post by **45punkbus** » Sun Apr 09, 2006 11:15 pm

MADZUKI wrote:
45punkbus wrote:i have green shag pile carpet matts in the front of my troopy and the back is totally shagpile
funny....not living up to the name?

shut it emo

Post by **Goatse.AJ** » Mon Apr 10, 2006 3:20 am

Most carpet places will sell you offcuts/leftovers. I found commercial/office carpet works well, got it in the back of mine.

Make a template out of paper and then mark the pattern onto the carpet so you can cut it.

Post by **81 rangie** » Mon Apr 10, 2006 10:53 am

on my rangie i just went and got some new offcuts from the bin at night from a carpet place. (these are brand new way big enough pieces) took the old one out, used that as a template and then used some double sided tape in places to help it mould better.

Post by **runnin4life** » Mon Apr 10, 2006 3:16 pm

sweet thanks for the sugestions

i will give all avenue' offered ago
the carpet place sounds good cus the carpet i was looking at is like $35 a metre and its 1.6 wide so it would need a shnit load

cheers
elliot

Post by **RockyF75** » Mon Apr 10, 2006 7:52 pm

I have a friend who does apholstry in syd, PM me if you want his phone number. Did a good job on mine, and could prolly get the carpet cheaper (trade prices). Thats if you dont want to DIY. Didnt need to be moulded for my rocky, 3mm(?) marine carpet.

Post by **runnin4life** » Tue Apr 11, 2006 9:31 pm

RockyF70 wrote:I have a friend who does apholstry in syd, PM me if you want his phone number. Did a good job on mine, and could prolly get the carpet cheaper (trade prices). Thats if you dont want to DIY. Didnt need to be moulded for my rocky, 3mm(?) marine carpet.

thanks i will keep this in mind if i decide im out of my league

Post by **nicbeer** » Wed Apr 12, 2006 8:02 pm

Get some offcut marine carpet. at least it is water proof. Thats whats going in my zook.

Nic

Post by **runnin4life** » Wed Apr 12, 2006 8:16 pm

i cant see the point of water proof carpet it will find away to go between the carpet and the water will sit between carpet and metal and rust

or do you mean it wont rot and crap it self when wet

Post by **RockyF75** » Wed Apr 12, 2006 10:39 pm

runnin4life wrote:or do you mean it wont rot and crap it self when wet

bingo

If it was truly waterproof it'd havta be plastic

I got 3mm(?) marine in mine atm, but still cant get it wet cuase the sound proofing under it will rot

Post by **runnin4life** » Thu Apr 13, 2006 6:01 pm

yer when i replace the carpet im gunna spray a few coats of sound deadener (spelling???) probally build a nice thick layer

was thinking of getting the sound absorbing foam stuff or felt not sure what its made off and put it in all the doors and inner cavities but i though if its gets wet its harder to get to and you wont know till its rotting and gone yuck

would be fine on a normal car

any ways ill keep you all updated when it happens

Post by **GQ Bear** » Sat Apr 15, 2006 12:23 am

The first time i fully drowned the trol i let it bake in the sun for a week with doors open
still stinks - lift the carpet, underlay is soaked
remove carpet, steam clean and replace.

The next time i drowned it i ripped the carpet out and tore all the underlay off and then replaced it

The next time i drowned it (notice a trend here) the whole bloody lot came out and has and will never go back in

Floor and hump get a wee bit hot, nothing a rubber floor mat doesn't fix. some people even spray body deadener everywhere, why bother?

The bottom line is carpet/vinyl and serious 4wheelin' don't mix

Post by **DamTriton** » Sat Apr 15, 2006 2:11 am

GQ Bear wrote:The first time i fully drowned the trol i let it bake in the sun for a week with doors open
still stinks - lift the carpet, underlay is soaked
remove carpet, steam clean and replace.

The next time i drowned it i ripped the carpet out and tore all the underlay off and then replaced it

The next time i drowned it (notice a trend here) the whole bloody lot came out and has and will never go back in

Floor and hump get a wee bit hot, nothing a rubber floor mat doesn't fix. some people even spray body deadener everywhere, why bother?

The bottom line is carpet/vinyl and serious 4wheelin' don't mix

I noticed the trend................done it a few times myself, but with an EFI system mounted on the firewall under the passengers feet I also had a few other thing to think of................

Post by **GQ Bear** » Sat Apr 15, 2006 12:13 pm

'92 efi GQ, I've had mud, water and muck..............eghhhh...i can smell and taste it again just thinking about it............

..........Mmmmm...beer...............
Now where was I? that's right mud and crap upto my bum when sitting , driving trying not to let it stall whilst winching

No probs with computer, just water in dizzy and rectifier -- easy fix!

Post by **smiley_smoke** » Sun Apr 16, 2006 11:36 am

hi mate i had all these questions as well cos underlay is a b!tch and normal carpet just rots over time and holds water. i went and put in 6mm rubber allt he way through and made it in a few sections so i can pull it out and hose if off, then hose out the car.

i went to clarks rubber for my stuff.. it was a bit exy but you dont the hell sexy look of checkerplate

and being 6mm it acts like a bit of a noise reduction layer as well. check the attached photo. can post more if you want a look of the back as well? i have made press stud covers for the wheel arches as 6mm is way to thick to 'mould' and cut yourself to fit.

hope it helps in your decisions.

cheers

Post by **ofr57** » Sun Apr 16, 2006 12:14 pm

I got astro turf in my zookie ute

works great

have trouble mowing it and all though

Post by **bluemq** » Sun Apr 16, 2006 2:53 pm

runnin4life wrote:hi all
im after some help in regards to making some carpet for my F20
it already got carpets but its worn through or faded or torn etc etc

i want to replace it but cant find moulded carpets or replacments short of going to a auto trimer i wouldl ike to have a crack at it

if any one has any links etc that could help it would be great
cheers
elliot

$80 I bought 4x2.2metres of marine carpet and cut it out myself.

worked a treat and was washable with the hose.

looked very professional and took about 3 hrs total to do properly (taking my time)

Post by **runnin4life** » Sun Apr 16, 2006 9:13 pm

never thought of the
propeller plate rubber before

Post by **PCRman** » Tue Jan 19, 2010 3:08 pm

Bit of a dig but has anyone used any molded carpets from these guys?

http://www.all-car-carpets.com.au/

I'm looking at turfing the old carpet and underlay and putting the vinyl stuff in my zook along with the water proof underlay they do. Chances of getting my zook wet are low so I'm more concerend with being able to easily clean out sand and dirt but I'm looking at the waterproof underlay just in case.

If anyone has used them how did they go for fit? Are they well molded and is the vinyl tough enough not to rip or wear holes through quickly?

Post by **Polar_Bear** » Wed Jan 20, 2010 11:29 pm

ive got a full vinyl floor from them for my zook, in 3 pieces, looks pretty tough. I havent installed it yet so cant comment on how well it all fits up yet. I dont know if they do one for a lwb, i'll see if i can get some pics up tomorrow

Post by **PCRman** » Thu Jan 21, 2010 9:57 am

Polar_Bear wrote:I dont know if they do one for a lwb, i'll see if i can get some pics up tomorrow

Pics would be awesome but don't rush, I'm not making a decision on what to get until Feb. They list a lwb on the website, it looks like I would just need to get some more vinyl/rubber and underlay to cover the cargo space behind the rear seats. I'll want to go super heavy duty in the back as I'm always draging the engel, fishing boxes, etc out and don't want anything that might rip.

Outer Limits 4x4 Board

carpet in the 4B

carpet in the 4B

Re: carpet in the 4B

Re: carpet in the 4B

Re: carpet in the 4B

Re: carpet in the 4B

Who is online