Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
went out with gezook today, found that I've got no front wheel drive, we pulled the spring locking hub thingies out and cleaned them up while we where out and put it back together but hasn't fixed the problem.
I have have no unusual noises or vibes. what do you guys think before I pull her apart?
Even though you pulled the hubs apart already I reckon that's still the most likely culprit. Are you sure they are engaging properly?
Try jacking the front axle off the ground. Have someone hold the driveshaft, engage the hubs and spin one of the wheels. IF the hubs are engaging properly the other wheel should spin the opposite direction. If it doesn't then one of the hubs may not be engaging. It could also be a broken axle shaft or something like that.
EDIT: Not to be a smart arse but you DID put it in 4WD didn't you? Just to be sure engage 4WD and have someone check if the front shaft spins when you move.
went out with gezook today, found that I've got no front wheel drive, we pulled the spring locking hub thingies out and cleaned them up while we where out and put it back together but hasn't fixed the problem.
