Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Things Already Done
Fuel injected 5K corolla motor and gearbox
31 inch MTR's large offset rims
I Plan to still drive it so I can't go to far
Things to do.
Put chopped soft top body on
LWB Chassis
Superior Engineering front and rear drop shackles.
Rear shock bar and front shock hoops and long series shocks
rockcrawler gears
ARB air lockers front and rear.
Roll cage
Tube front bar and custom tray.
Just waiting to sell my patrol to fund the project
Nice ´wheeling!
Judging from that vid, I think you should put the lockers at the top of your priority list,,,, then some gearing,,, then some flex,,, and on and on and on!
Keep it coming!
if you don´t know its impossible, you just might do it!
I Just brought this car for the motor and a bit of fun.
I am just waiting to pick the LWB chassis up. I already have the soft top body and have already cut it down. the lockers are sitting next to the body ready for the new chassis.
all I need is the time to put it together after I get the chassis next week end.(Hopefully)
Kovu wrote:I Just brought this car for the motor and a bit of fun.
I am just waiting to pick the LWB chassis up. I already have the soft top body and have already cut it down. the lockers are sitting next to the body ready for the new chassis.
all I need is the time to put it together after I get the chassis next week end.(Hopefully)
do wat i did find a lwb with a 1.3 motor and a body thats so rusted the tops of the doors are stuffed then just put ur swb body on it
89 lux 2bl 4inch spring 35's etc still slow as a snail
The engine was already in the car when I brought it.
but the transfer hasn't been moved back, although the jack shaft is basicly 2 uni's welded together.
engine mounts are forward a bit.
it fits in the hole nicely
