Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

How long is your 2H dipstick?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

How long is your 2H dipstick?

Post by dogbreath_48 »

The top of my dipstick broke off after a dodgy repair by a previous owner. I got a replacment from the wreckers.

The number on the old one is 15301 - 68020
The number on the new one is 15301 - 68010

When i compare the two, the new one seems to be about 1cm longer, but i'm not sure which one is off - i suspect the repaired one has been shortened in the process, but want to make sure given the numbers are different as well!

So what i ask is, exactly how long is your dipstick, between the F line and the stopper at the top end, the number, and what model/year engine it is out of!

I would really really appreciate someone's help! this 1cm just about makes the difference between F and L!

-Stu :)
Tetanus rolling on 37's
Top
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Post by Ruffy »

i'll go measure right now
Top
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Post by Ruffy »

Mine's the 68010 and it's 547mm long from the 'F' line to the bottom of the rubber. It's out of a 81 model hj 60.
Top
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

Ruffy wrote:Mine's the 68010 and it's 547mm long from the 'F' line to the bottom of the rubber. It's out of a 81 model hj 60.
Thanks very very much for that ruffy, someone send this man a beer! (i can't, cruiser=poor). Mine's the same.

Now i need someone with a 68020 to see if they're all the same!

-Stu :)
Tetanus rolling on 37's
Top
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Post by Ruffy »

The engine should hold 10.8 litres of oil. If you drain it and measure the amount you put in that should tell you how close it is to correct.
Top
Posts: 286
Joined: Mon Jul 25, 2005 8:06 pm
Location: N.Q.

Post by bigbrowndog »

88 model, HJ75 15301 68020 is 582mm from full mark to bottom of plastic seal.
Top
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

I just measures my old mans as well. Looks like the 68020 and 68010 are the same, at 583mm.

Ruffy, i'm assuming you measured to the lowermost point on the rubber? Wheras me and bigbrowndog measured to the flat stopper (that sits on top of th tube).

Next question: What happens when you overfill? Mine's now 1cm past full. I've heard contact with the crank can cause the oil to foam, but i don't imagine 1cm could make that difference, given the engine is expected to operate on angles..

-Stu :)
Tetanus rolling on 37's
Top
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Post by Ruffy »

Yes i measured from the very lowest part of the rubber.
I run mine 1 litre overfull at oil changes cos it tends to burn a bit!! that puts it about 1 cm over the mark. never had a drama.
Cheers
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 15 guests