Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Early 4.8`s into V6 third

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 2136
Joined: Mon Dec 01, 2003 6:36 pm
Location: Lake Macquarie

Early 4.8`s into V6 third

Post by 4sum4 »

What`s involved in fitting the 4.8 R/P and ARB from an Early type Third to the V6 Third
[url=http://downunder4x4.net/forum/showthread.php?t=1650]86 Hilux[/url]
and a 84 extra cab



If Rocks Had P^ssies Our Lives Would Be Perfect :D...
Top
Posts: 2136
Joined: Mon Dec 01, 2003 6:36 pm
Location: Lake Macquarie

Post by 4sum4 »

TTT
[url=http://downunder4x4.net/forum/showthread.php?t=1650]86 Hilux[/url]
and a 84 extra cab



If Rocks Had P^ssies Our Lives Would Be Perfect :D...
Top
Posts: 398
Joined: Fri Oct 25, 2002 5:40 am
Location: near gosford,central coast, nsw

Post by cplux »

not sure about the ratio, but i think the bearings for the arb u will need to have spacers made up so you can use the bigger bearings that the v6 does (had to do this on my 80series hp with hilux/lockrite carrier).
Top
Posts: 2136
Joined: Mon Dec 01, 2003 6:36 pm
Location: Lake Macquarie

Post by 4sum4 »

cplux wrote:not sure about the ratio, but i think the bearings for the arb u will need to have spacers made up so you can use the bigger bearings that the v6 does (had to do this on my 80series hp with hilux/lockrite carrier).
I was hoping thats all ,just hope the pinion bearing is te same
[url=http://downunder4x4.net/forum/showthread.php?t=1650]86 Hilux[/url]
and a 84 extra cab



If Rocks Had P^ssies Our Lives Would Be Perfect :D...
Top
Posts: 349
Joined: Tue Nov 12, 2002 5:40 pm
Location: Central Coast NSW

Post by hophoar »

Pinion offset in the witchs hat is different as the V6 didn't come out with 4.8's ie: 3.9,4.1,4.3 the pinion bearings should be the same if using heavy duty ones.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 60 guests