Well the 2f in my fj45 troopy has a slight bottom end knock and looses a bit of oil pressure at speed so i've decided its time to start buying bits for a rebuild
So what brands of pistons can one buy for a 2f and is there any rebuild kits that come complete with pistons rings bearings gaskets ect
links to web sites whould be good but please here in aus
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
2f pistons/engine rebuild kits
Moderators: toaddog, Elmo, DUDELUX
2f pistons/engine rebuild kits
[quote="RN"]So do you support your local vendor...not if it is going to cost me almost double. [quote]
Re: 2f pistons/engine rebuild kits
i've heard that a knock, and loss of oil pressure can be due to a failing cam gear, try this link http://forum.ih8mud.com/showthread.php?t=13337Hamo wrote:Well the 2f in my fj45 troopy has a slight bottom end knock and looses a bit of oil pressure at speed so i've decided its time to start buying bits for a rebuild
So what brands of pistons can one buy for a 2f and is there any rebuild kits that come complete with pistons rings bearings gaskets ect
links to web sites whould be good but please here in aus
might prolong a rebuild for you?
Spit my last breath
geoff walsh, SMS, and Don Kyatt's will probably all have kits, but wait until you get it apart, you might find that you don't need pistons and just a fresh set of rings and bearings will see it right. The last 2F I pulled apart had almost 300,000km and could still see the hone marks in the bores, they were well within tolerance as were the pistonies.
as mentioned check the thread on IH8MUD
as mentioned check the thread on IH8MUD
Free air locker to the first 20 callers!
Who is online
Users browsing this forum: No registered users and 0 guests