Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Blue Plate Heaven

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 137
Joined: Thu May 01, 2003 12:21 pm
Location: The Gymp. QLD

Blue Plate Heaven

Post by rangemann »

It took 3yrs of looking and drinking along with 5weeks of doing work but I finally finished my conversion. My 84 with T/F now has a 5.0L with HSV chip, ZF Auto and 2" body lift. Already I have Pro's and Cons.

CONS:

ZF shifts to early for engine torque. Manual shifting gives much better performance.


PROS:

Sounds farking wild with twin exhaust.

Fused Spider Gears in rear rear diff. :twisted:

Clunking front diff. :twisted:

Ok, so maybe those aren't pros....... but i know how to change 'em out now :)

Gotta cut more holes in the bonnet, getting a bit warm. Flogged it pretty hard since getting it out of the shed and no gearbox problems....yet. If the ZF goes then I'm pushing the whole thing into the creek. but i'm pretty confident we got it right.

Thanks Auto_Eng for all your help. Your big words and and nit picking really made the job go faster.....hahaha, just kidding mate.

Thanks HSV Rangie for your info all those years ago.

Tips for anybody else:

Take photo's of everything BEFORE you pull it apart
Don't ask your engineer for advice - He'll just tell you the HARD way, Oops, I mean SAFE way.... ;)

Well I'd better go bootleg some more beanie babies so I can buy some fuel.
"elephant lisa, it's an elephant"
"ahhhhhhh, boogie man!"
GO THE MIGHTY BLUES!!!
Top
Posts: 17
Joined: Wed Mar 02, 2005 7:20 pm
Location: Perth (WA)

Post by bmsa »

G'day rangemann

Good to here you finally got her on the road, I guess you've had some time on your hands. Hopefully you will get plenty of play time in now.
Cheers

Ben
______________________

LC79 - MT's, 2" lift using koni/kings/parabolics, 3" Taipan exhaust and the usual touring gear.
Top
Posts: 137
Joined: Thu May 01, 2003 12:21 pm
Location: The Gymp. QLD

Post by rangemann »

Hey Ben!!

BMSA hey??

like i said, busted 2 diffs already and that was just from doing donuts :roll:
but it's running well. I was pretty scared i'd get some sort of electrical short halfway through the mary river but it was all cool, it's pretty low.

yeah, had plenty of time. got to organise some back pay. should be getting my visa monday, hopefully flying out within the week following that. time to make some money for all the driveline upgrades ;)
"elephant lisa, it's an elephant"
"ahhhhhhh, boogie man!"
GO THE MIGHTY BLUES!!!
Top
Posts: 17
Joined: Wed Mar 02, 2005 7:20 pm
Location: Perth (WA)

Post by bmsa »

What diffs are you running I know you where talking alot about maxi?

Maybe donuts on the bitueman arn't a good idea ;)

How about pictures?
Cheers

Ben
______________________

LC79 - MT's, 2" lift using koni/kings/parabolics, 3" Taipan exhaust and the usual touring gear.
Top
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Contact:
Contact HSV Rangie

Post by HSV Rangie »

good to hear all is good. :lol:

have fun with it.

Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Top
Posts: 137
Joined: Thu May 01, 2003 12:21 pm
Location: The Gymp. QLD

Post by rangemann »

haven't upgraded the diffs or cv's yet. was thinking jacmac aktually. but i dunno, i'll take some time to think and read.
some searches are in order. there's crazy ideas everywhere in here.

i think HSV Rangie should do the search and list all the options in a sticky along with what size tyres certain options are likely to handle.
then i think he should provide contact details to source such parts.
also a breakdown of costs and work involved would be good too.
is that really too much to ask of your moderator???

ask not what you can do for your moderator, but what your moderator can do for you ;)

i'll see if i can put picks up this arv. not much to look at. same ol' same ol'
"elephant lisa, it's an elephant"
"ahhhhhhh, boogie man!"
GO THE MIGHTY BLUES!!!
Top
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Contact:
Contact HSV Rangie

Post by HSV Rangie »

rangemann wrote:haven't upgraded the diffs or cv's yet. was thinking jacmac aktually. but i dunno, i'll take some time to think and read.
some searches are in order. there's crazy ideas everywhere in here.

i think HSV Rangie should do the search and list all the options in a sticky along with what size tyres certain options are likely to handle.
then i think he should provide contact details to source such parts.
also a breakdown of costs and work involved would be good too.
is that really too much to ask of your moderator???

ask not what you can do for your moderator, but what your moderator can do for you ;)

i'll see if i can put picks up this arv. not much to look at. same ol' same ol'

:lol: :lol: :lol: :lol: :lol:

Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Top
Posts: 410
Joined: Thu Aug 21, 2003 8:40 am
Location: Upper Hunter Valley NSW

Post by rick130 »

don't laugh Michael, I think he could be angling for you to do the spanner work as well.... ;)
300Tdi Defender 130 CC
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 4 guests