Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

White smoke on start up ?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 66
Joined: Fri Feb 11, 2005 2:36 am
Location: Sydney

White smoke on start up ?

Post by soo33y »

Hey guys,

I currently have a 2LT motor in my LN106 Hilux.

On start up, it takes a fair bit of cranking to get started - maybe 2 to 3 goes. I think I need new glow plugs.

And then, when it finally starts up, it blows white smoke everywhere, however, after approximately 10 seconds the white smoke disappears.

What does this "white smoke" signify ?

Cheers.
Top
Posts: 541
Joined: Sun Sep 28, 2003 5:04 pm
Location: in the shower..

Post by carts »

As you suspect, it will either be a problem with the glow system, perhaps 1 or 2 glow plugs arent firing up, or you have low compression. I'd be checking all your glow plugs first.... White smoke indicates excessive unburnt fuel from poor combustion.
If you want a spare 60 for bits-
http://carl.outerlimits4x4.com/viewtopic.php?p=1109227#1109227
Top
Posts: 66
Joined: Fri Feb 11, 2005 2:36 am
Location: Sydney

Post by soo33y »

Thanks carts,

I'll be doing the glow plugs this week !

Cheers,
Daniel
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests