DROP BOXS FOR FRONT CONTROL ARMS

Post by **michael a** » Tue May 02, 2006 6:58 pm

hAS ANY ONE USED THESE BEFORE ARE THEY ANY GOOD ANY ONE KNOW WHERE I CAN GET THEM NEW OR SECOND HAND.

Post by **DBW** » Tue May 02, 2006 7:48 pm

Hey dude,

Ludacris is a member on here who can supply them for $380. Shoot him a pm, or he will see this sooner or later!

Cheers

Post by **Potter** » Wed May 03, 2006 9:07 am

By putting Drop Boxes on does it change the way your car handles?
Pro's and con's please

Post by **morkz** » Wed May 03, 2006 9:12 am

troll01 wrote:By putting Drop Boxes on does it change the way your car handles?
Pro's and con's please

No what drop boxes do is return the castor to its orginal position so it allows you to run genuine nissan bushes and not castor bushes or castor plates which can come loose.

The only negative part about drop boxes is that they hang down from the cross member but not that much and some people complain they get hung up.

Alot of people i know run drop boxes and no problem so if your looking for castor correction thats a bolt on and is reliable go drop boxes.

The ones i recommend are climax industrie boxes they are used on many comp trucks such as rohans supercharged middy so they can stand the punishement i have seen some boxes get smashed or dented when the driver hits something hard rohan has hit so much stuff on his cross memeber yet his drop boxes are ultra strong.

If you want some they are about $450

Post by **Tiny** » Wed May 03, 2006 10:24 am

the only people I have heard complain that they can hang you up have never tried them, everyone I know who runs them me included love them

Post by **giantracing** » Wed May 03, 2006 10:46 am

$350 a pair made to suit lift........

Post by **HeathGQ** » Wed May 03, 2006 1:42 pm

i've been hung up on mine, but a quick reverse and re-align fixed it.

Post by **Potter** » Wed May 03, 2006 1:57 pm

how far do your drop boxes hang down?

Post by **Jimbo** » Wed May 03, 2006 2:18 pm

I was going to get drop boxes but at the time i didnt have the cash. I went plates and i think they work great. I got them installed and they welded the front instead of drilling. My patrol handles great now and seems to flex as good (if u can call it good) as any other patrol i have seen

Cheers

Post by **mickyd555** » Wed May 03, 2006 6:05 pm

troll01 wrote:how far do your drop boxes hang down?

i think you get them made to suit the amount of lift you have. Call Chris as above (giantracing) he will make a good set for you.

Post by **JOHNZ** » Thu May 04, 2006 1:20 pm

michael a wrote:hAS ANY ONE USED THESE BEFORE ARE THEY ANY GOOD ANY ONE KNOW WHERE I CAN GET THEM NEW OR SECOND HAND.

Bolt on drop boxes $375. They only hang down 90mm. Instock now.
cheers JOHNZ

Post by **ludacris** » Thu May 04, 2006 5:31 pm

Drop boxes are the ultimate in correcting castor after lifting your rig unless you can afford the $1500 for the aftermarket arms. Bolt in boxes are the go.

LudaCris

Outer Limits 4x4 Board

DROP BOXS FOR FRONT CONTROL ARMS

DROP BOXS FOR FRONT CONTROL ARMS

drop boxes

Re: DROP BOXS FOR FRONT CONTROL ARMS

Who is online