Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rancho Part Number...

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 606
Joined: Fri Jun 10, 2005 6:48 pm
Location: Victoria

Rancho Part Number...

Post by vanzbrown »

This might sound stupid, but is there a part number on my Rancho Shocks. Had a bit of a look just now, but it was probably too dark. Just wanted to know so i can look up some specs on them. They are Rancho 9000's 5way adjustable on a 2in lifted cruiser. There were on the beast when i bought it.

Cheers...
Posts: 399
Joined: Mon Nov 25, 2002 5:29 pm
Location: Sydney

Post by AussieCJ7 »

On the bottom of the shock cast into the tube should start with RS90xx or RS91xx

rule of thum the lower the last 2 digits the longer the travel eg 9112 are 10" travel 9113 are 8"

http://www.off-road.com/toyota/tech/shocks/index2.html
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

Are you sure?

My ranchos: 9012 - 12" of travel, eye/eye "soft" valving
9009 - 10.75" of travel pin/eye. REALLY soft vlaving.

but... a 9036 has 15" of travel and the same valving as a 9012

I have a rancho book, and I really don't think there is any way to really "read" the rancho part numbers.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Post by Slunnie »

Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests