Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Gear Box Problem

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 18
Joined: Wed May 26, 2004 9:17 am
Location: Christchurch New Zealand

Gear Box Problem

Post by red devil »

Having problems getting the truck into low range.

the leave will move up to 4hilock and then slide sideways but not enuff to allow the leave to slide forwards to pickup 4lolock

any ideas on what may be the problem.
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Re: Gear Box Problem

Post by -Scott- »

red devil wrote:Having problems getting the truck into low range.

the leave will move up to 4hilock and then slide sideways but not enuff to allow the leave to slide forwards to pickup 4lolock

any ideas on what may be the problem.
Looking at your avatar... :lol:
Posts: 1130
Joined: Thu Nov 18, 2004 7:25 pm
Location: New Zealand

Post by NJV6 »

Have you done a body lift & not bent the transfer lever?
1994 NJ SWB, 3.5, 5 speed manual, 33's, XD9000, 4.9 diffs, Front & Rear ARB's, Safari Snorkel

2008-2009-2010-2011 Pavlova in the shed.
Posts: 18
Joined: Wed May 26, 2004 9:17 am
Location: Christchurch New Zealand

Post by red devil »

At less i am not driving a shinney SCOTT.

Yes there is a 50 mm body lift and i have cut out the for the lever for both 2wd and 4 low

sorry i for got to add it not my truck that is having the problem its a buddy that i go out with and yes his truck is a little better looking then mine.

it feels like there is a link missing inside the gear box or it may be jamed.

are there any which are known to do this

jono
92 vx landcruiser
4" supension lift
1" body lift
35" MT wangers
Posts: 161
Joined: Mon Jan 06, 2003 4:46 pm
Location: USA

Post by Lordtrunks »

I'm thinking its the pin in the shifter i'd pull the cover off the shifters and check and see how far the pin has been driven or not driven.
89 3.0 2dr auto, locked, tbars cranked,2"BL, 35's rollbar no top aisin hubs
Posts: 18
Joined: Wed May 26, 2004 9:17 am
Location: Christchurch New Zealand

Post by red devil »

Thanks Lordtrucks ill have a look this weekend :)

jono
92 vx landcruiser
4" supension lift
1" body lift
35" MT wangers
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests