I'm a newbie to all this stuff. Could somebody tell me what would be required to convert the Suzi's 5 stud thread pattern into a 6 stud one? Is there a way it is possible without buying different axles?
Thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
5 stud to 6 stud
greg wrote:i've heard of people re-drilling the holes to suite a 6 stud pattern...
have you considered just buying some new wheels? this would probably be a cheaper option than buying new axels?
cheers,
Greg
you shouldn't need new axles. what you would need to look at would be the possible re-drilling of the drum brake hats and the front rotors. my thoughts would be that there isn't enough material to do this safely.
why do you want a 6 stud? there are a number of places that can do custom wheels and there are a few off-the-shelf rims that will allow you to run bigger offset and larger tyres.
more info required mate.
Skippy
--------------------------------------------------
for all things digital, come to NEWflavour
'a better tasting multimedia experience'
http://www.newflavour.com/
--------------------------------------------------
--------------------------------------------------
for all things digital, come to NEWflavour
'a better tasting multimedia experience'
http://www.newflavour.com/
--------------------------------------------------
becky wrote:We have factory suzuki six stud discs & hubs. They are fairly rare in Australia.
that must suck for replacement parts.
Skippy
--------------------------------------------------
for all things digital, come to NEWflavour
'a better tasting multimedia experience'
http://www.newflavour.com/
--------------------------------------------------
--------------------------------------------------
for all things digital, come to NEWflavour
'a better tasting multimedia experience'
http://www.newflavour.com/
--------------------------------------------------
Posts: 3825
Joined: Wed Nov 06, 2002 8:42 pm
Joined: Wed Nov 06, 2002 8:42 pm
Location: in the sky , its a bird , its a plane ! No its super MOOSE !!!
I've been told to tell you moose that you that this is how you spell peugeot like this. Also according to JJJ, if you're not black and you say Bling Bling you're a Tool Tool. Ayo, if you're down wit tha hood, it alllll good. Aiiiiiiiight
If we can put one man on the moon, why can't we put them all there!!
I think I need some english lessons!
Hang on, a thread hijacking and I wasnt invited!!?!?! 
Beck, what is the PCD of the 6 stud suzuki stuff you have? I wonder if we're able to order those hubs/drums from suzuki? That would be an easy (but I doubt cheap) way of doing it.
Why would the drums be such an issue? I cant think of why it would be a problem just to redrill them. If it turns out that you cant drill the drums you could do a rear disk conversion at the same time. Usually the drums have the outers cut off to make a sort of adapter plate that bolts to the end of the axle which accepts the disc rotor. You could easily have something custom made to suit a 6 stud rotor or just redrill the rotor with the 6 stud PCD.
If you actually want to wheel the thing with some decent size rubber you can kill 2 birds with 1 stone by swapping your zook axles out for donors from a hilux. Big job just to change the stud pattern but worth it if you are going with bigger tyres (32+?) as well.
Another option, i think CRUSHU is selling some PHAT 15x10 alloys, check out for sale section.
Beck, what is the PCD of the 6 stud suzuki stuff you have? I wonder if we're able to order those hubs/drums from suzuki? That would be an easy (but I doubt cheap) way of doing it.
Why would the drums be such an issue? I cant think of why it would be a problem just to redrill them. If it turns out that you cant drill the drums you could do a rear disk conversion at the same time. Usually the drums have the outers cut off to make a sort of adapter plate that bolts to the end of the axle which accepts the disc rotor. You could easily have something custom made to suit a 6 stud rotor or just redrill the rotor with the 6 stud PCD.
If you actually want to wheel the thing with some decent size rubber you can kill 2 birds with 1 stone by swapping your zook axles out for donors from a hilux. Big job just to change the stud pattern but worth it if you are going with bigger tyres (32+?) as well.
Another option, i think CRUSHU is selling some PHAT 15x10 alloys, check out for sale section.
1MadEngineer wrote:shame all the "guru's?" have forgotten to tell you that suzi's were available in 6 stud. call 4x4 parts aust in bris they have some of the drums and discs. although you have to get the right salesman. (checked on sat and they are still there..........
Looks like its a shame you didnt read all this thread because it has allready been mentioned
becky wrote:We have factory suzuki six stud discs & hubs. They are fairly rare in Australia.
Posts: 3825
Joined: Wed Nov 06, 2002 8:42 pm
Joined: Wed Nov 06, 2002 8:42 pm
Location: in the sky , its a bird , its a plane ! No its super MOOSE !!!
Who is online
Users browsing this forum: No registered users and 0 guests