Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Ironman lift kits

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 1819
Joined: Wed Jul 21, 2004 1:48 am
Location: Sunny Coast

Contact:
Contact munecito

Ironman lift kits

Post by munecito »

Hello guys.

I have a friend in Spain who bought a set of Australian made Ironman lifted spring leaves for his samurai (sierra with the steerig wheel in the left side). The problem is that the front ones seem to be higher but shorter causing the front shaft to make noises as it is just long enough to be installed between the transfer and the front diff. So he tried to drive the car and it started to make clanking and grinding noises so he just stopped the car and put the old leaves back.

I have read here about the back leaves of ironman being hard, and apparently badly designed.

Can someone give me a feedback about the front ones??? It is a 5" lift kit.

Regards.

Will
Diz is a private forum n membership is at da absolute discretion of da Forum Crazy Ass Nigga/Admin
Top
Posts: 1889
Joined: Mon Sep 20, 2004 10:23 pm
Location: Brisbane

Post by just cruizin' »

A 5" likt will mean that the drive shaft angles are too great for the uni's. He'll probably need a double carden (spelling) joint drive shaft front and rear. Other's will correct me if I'm wrong but 5" sounds excessive.
Top
Posts: 1819
Joined: Wed Jul 21, 2004 1:48 am
Location: Sunny Coast

Contact:
Contact munecito

Post by munecito »

Sorry it was a 2" lift or 5 cm.

Will
Diz is a private forum n membership is at da absolute discretion of da Forum Crazy Ass Nigga/Admin
Top
Posts: 357
Joined: Fri Sep 16, 2005 9:30 am
Location: Tamworth

Post by mr green »

i think tere is a left and right side because one side id mountedup the pumkin a little and yes i have heard that one is shorter than the other aswell, try swapping side to side. plenty of sprung overs have little drive shaft issues(roughly 3-4'' lift)
jason
WANTED: swb vitara rear seat. the 3 seater bench type
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
Top
Posts: 311
Joined: Fri Nov 12, 2004 3:59 pm
Location: Sunshine Coast

Post by beally »

probably need to get a spacer made for the drive shaft.
Top
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Post by sierrajim »

are the springs in the correct way?

are they in the right end eg front to rear?
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Top
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

Anywhere in Australia that sells cheap 1" driveshaft spacers for a 1.3?
Top
Posts: 1819
Joined: Wed Jul 21, 2004 1:48 am
Location: Sunny Coast

Contact:
Contact munecito

Post by munecito »

Thanks for the replies guys.

I called my friend so he could explain me better the situation. The problem is the opposite of what I thought. After he installed the Ironman springs the front axle seems to have moved backwards, so the front shaft is too long to engage with the transfer.

Anyway, he has almost convinced the supplier of giving him a new set of OME springs.

The car is now in the shop and they are checking that his claim is genuine, also they want to take pictures and measurements to return them to the importer.

Will
Diz is a private forum n membership is at da absolute discretion of da Forum Crazy Ass Nigga/Admin
Top
Posts: 8459
Joined: Mon Nov 29, 2004 8:15 pm
Location: Townsville

Post by "CANADA" »

could it be that he has installed the front set backwards? can he send you any pics to help
[quote="dazza30875"]whats "FAIL" mean[/quote]

[quote="fool_injected"]

Sometimes your funny Canada :D[/quote]
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 6 guests