got a td42 with 350k on it running a turbo. before i put it in my car i'm gonna pull the head off it and get it checked over but what about piston rings and big end bearings and possibly liners? 350 aint really that much for a diesel motor is it?
whats most other people done?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
new rings and liners?
new rings and liners?
Honey i cut the car in half!
bought the motor off tiny in sydney. its a td42 with 350k on it and turbo's been on for around 40k (thanks for the history tiny)
Its going into my gq, got a petrol tb42 atm and doing a full conversion cause my petrol takes the rooster! oh by the way in a few months there will be a tb42 forsale with EA falcon centre point fuel injection for sale for 800 bucks.
yeah yeah matty what if i dont get it in! you gonna fall asleep at the wheel waiting for me?!
Its going into my gq, got a petrol tb42 atm and doing a full conversion cause my petrol takes the rooster! oh by the way in a few months there will be a tb42 forsale with EA falcon centre point fuel injection for sale for 800 bucks.
yeah yeah matty what if i dont get it in! you gonna fall asleep at the wheel waiting for me?!
Honey i cut the car in half!
bought the motor off tiny in sydney. its a td42 with 350k on it and turbo's been on for around 40k (thanks for the history tiny)
Its going into my gq, got a petrol tb42 atm and doing a full conversion cause my petrol takes the rooster! oh by the way in a few months there will be a tb42 forsale with EA falcon centre point fuel injection for sale for 800 bucks.
yeah yeah matty what if i dont get it in! you gonna fall asleep at the wheel waiting for me?!
Its going into my gq, got a petrol tb42 atm and doing a full conversion cause my petrol takes the rooster! oh by the way in a few months there will be a tb42 forsale with EA falcon centre point fuel injection for sale for 800 bucks.
yeah yeah matty what if i dont get it in! you gonna fall asleep at the wheel waiting for me?!
Honey i cut the car in half!
Liners new from Nissan $183 each standard size. Pistons standard size $60 each. Liners can be very tough to remove, but new ones drop straight in. I had a tool made up to remove them. Ring set $380 i think
Nick
P.S at that Km's main/small end bearing wear might be a problem. When i did my rebuild, bores had negligible wear--bearings were just starting to show metal@550,000km's
Nick
P.S at that Km's main/small end bearing wear might be a problem. When i did my rebuild, bores had negligible wear--bearings were just starting to show metal@550,000km's
Who is online
Users browsing this forum: No registered users and 2 guests