Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

will disco auto fit behind a 3.5 ranger motor

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 947
Joined: Fri May 16, 2003 10:10 pm
Location: hervey bay

will disco auto fit behind a 3.5 ranger motor

Post by humphey »

and help on the subject will be great :) i'm not up with all the ranger gear :roll:
Top
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Re: will disco auto fit behind a 3.5 ranger motor

Post by Micka »

humphey wrote:and help on the subject will be great :) i'm not up with all the ranger gear :roll:
if you mean the ZF auto, then yes.


Bring Trev to Rover Pk.
Bring Trev to Rover Pk.
Bring Trev to Rover Pk.
Bring Trev to Rover Pk.
Top
Posts: 947
Joined: Fri May 16, 2003 10:10 pm
Location: hervey bay

Re: will disco auto fit behind a 3.5 ranger motor

Post by humphey »

Micka wrote:
humphey wrote:and help on the subject will be great :) i'm not up with all the ranger gear :roll:
if you mean the ZF auto, then yes.


Bring Trev to Rover Pk.
Bring Trev to Rover Pk.
Bring Trev to Rover Pk.
Bring Trev to Rover Pk.
cool do u know where i can get one :cool: . man i just havent got the time at the moment to get him and he need some stuff done . rear steer and and rear disconect and some cuttin brakes than i'll be back ;) yea rite i'll be back into it soon :twisted:
Top
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Post by Micka »

what Tranny are you going to run?

You sure that you can mate whatever it is up to a ZF?

And this question should be in the Rover section, Boof :roll: :finger:

Its the one that says ROVER.

I think Bubs might have one. He was wrecking a Rangie, but I can't remember if it was auto or manual.

Otherwise...you live in Toowoomba. Just get the boys to lift one for you ;)


Micka
Top
Posts: 947
Joined: Fri May 16, 2003 10:10 pm
Location: hervey bay

f

Post by humphey »

Micka wrote:what Tranny are you going to run?

You sure that you can mate whatever it is up to a ZF?

And this question should be in the Rover section, Boof :roll: :finger:

Its the one that says ROVER.

I think Bubs might have one. He was wrecking a Rangie, but I can't remember if it was auto or manual.

Otherwise...you live in Toowoomba. Just get the boys to lift one for you ;)


Micka
sorry bro wrong section . as for lifting one there to heavy ;) . i'll pm bubs
Top
User avatar
POS
Posts: 4318
Joined: Tue Oct 22, 2002 8:52 pm
Location: Perth

Re: f

Post by POS »

humphey wrote:
Micka wrote:what Tranny are you going to run?

You sure that you can mate whatever it is up to a ZF?

And this question should be in the Rover section, Boof :roll: :finger:

Its the one that says ROVER.

I think Bubs might have one. He was wrecking a Rangie, but I can't remember if it was auto or manual.

Otherwise...you live in Toowoomba. Just get the boys to lift one for you ;)


Micka
sorry bro wrong section . as for lifting one there to heavy ;) . i'll pm bubs
Lighter than your Ford cr@p! :finger:
Top
Posts: 947
Joined: Fri May 16, 2003 10:10 pm
Location: hervey bay

Re: f

Post by humphey »

POS wrote:
humphey wrote:
Micka wrote:what Tranny are you going to run?

You sure that you can mate whatever it is up to a ZF?

And this question should be in the Rover section, Boof :roll: :finger:

Its the one that says ROVER.

I think Bubs might have one. He was wrecking a Rangie, but I can't remember if it was auto or manual.

Otherwise...you live in Toowoomba. Just get the boys to lift one for you ;)


Micka
sorry bro wrong section . as for lifting one there to heavy ;) . i'll pm bubs
Lighter than your Ford cr@p! :finger:
at least me ford crap keeps goin :finger: :finger: :finger: :rofl:
Top
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Re: f

Post by Micka »

humphey wrote:
POS wrote:
humphey wrote:
Micka wrote:what Tranny are you going to run?

You sure that you can mate whatever it is up to a ZF?

And this question should be in the Rover section, Boof :roll: :finger:

Its the one that says ROVER.

I think Bubs might have one. He was wrecking a Rangie, but I can't remember if it was auto or manual.

Otherwise...you live in Toowoomba. Just get the boys to lift one for you ;)


Micka
sorry bro wrong section . as for lifting one there to heavy ;) . i'll pm bubs
Lighter than your Ford cr@p! :finger:
at least me ford crap keeps goin :finger: :finger: :finger: :rofl:
Bwhahahahahaha :rofl: :rofl: :rofl:


Hey!

Mine has Rover shite too :oops: :cry:
Top
Posts: 947
Joined: Fri May 16, 2003 10:10 pm
Location: hervey bay

r

Post by humphey »

sorry micka that one was for pos :lol: he's so funny :roll: ;)
Top
Posts: 947
Joined: Fri May 16, 2003 10:10 pm
Location: hervey bay

Re: r

Post by humphey »

humphey wrote:sorry micka that one was for pos :lol: he's so funny :roll: ;)
one thing is the same when there bell up they all blow smoke :lol:
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

Don't get a ZF from a diesel, you will have to swap input shafts/bellhousings. All others will fit.

On a side note, has anyone used the rangie Torque-Flite in a buggy? Should be even stronger than the ZF???
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 463
Joined: Sun Nov 21, 2004 10:15 pm
Location: Kingston,Hobart, Tasmania

Post by justinC »

New of one in a 3.5 V8 buggy,
First three ratios are the same almost as ZF, Makes for good launches with a low ratio diff too. Easier to keep cool than a ZF I understand.

JC
'92 Rangie Sherwood/turbo intercooled isuzu4BD1 /ACE/ full leather/2.5" exh/2.5" body lift/DeCarbon shocks/LR tanks/LT95 back in and OK now, Sals conversion soon...
Top
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Re: will disco auto fit behind a 3.5 ranger motor

Post by Maggot4x4 »

humphey wrote: i'm not up with all the ranger gear :roll:
Isn't a Ranger a Ford, so that would still make this the wrong section :finger:
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
Posts: 490
Joined: Sat Oct 30, 2004 3:44 pm
Location: Sydney

Post by Philip A »

Just make sure you get a 4HP22 ie 3.9 Disco or Rangie with mechanical kickdown up to 95? on Range Rover but maybe later on Disco.
4HP24E will require an electronic controller, which no one makes for a ZF at present, but somone on this forum said could be done.
Regards Philip A
Top
Posts: 783
Joined: Sat Jan 01, 2005 1:34 pm
Location: Narellan NSW

Post by andrew e »

ISUZUROVER wrote:On a side note, has anyone used the rangie Torque-Flite in a buggy? Should be even stronger than the ZF???
I think the homeless has a TF, and sam keck had one in his vitara, which donated its mechanicals to his moon buggy. he had some trouble with it, can't remember what.......

Andy
Top
Posts: 1251
Joined: Sun Jan 02, 2005 11:36 am
Location: Nth brizzy

Post by not not »

no the homeless does not run the 727 anymore as we swaped it for a zf when we put the 3.9 in it the TF was a bit shaged
If you need it boof i can put you on to who has it now? but might need a look at.
Cheers Jamie
Top
Posts: 57
Joined: Thu Apr 27, 2006 7:56 pm
Location: Mackay, QLD

Post by C.A.Moseley »

my rangie has been fitted out with the disco zf and transfer. when i pulled the carpet up the other day i noticed the top half of the tunnel had been cut off and the disco section welded in to mount the shifters. The other part i have found out the hard way is that you can not remove the hand break drum at the rear of the transfer without dropping it down atleast an inch or two cos it will not clear the cross member.
'78 2 door Rangie, 3.9L , 2" body, 4" long travel, 35s, rear locker, disco auto, caged. GQ 4.2 18psi, 5" lift, ARB lockers, 33s,
Top
Posts: 947
Joined: Fri May 16, 2003 10:10 pm
Location: hervey bay

Re: r

Post by humphey »

thanks for all the info guy's , i didn't think there were so many combo's to go through and differant set ups for them .thanks again . i'll post up a pic off the rig later on .
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 3 guests