Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

dropped front hangers - hilux ?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 66
Joined: Fri Feb 11, 2005 2:36 am
Location: Sydney

dropped front hangers - hilux ?

Post by soo33y »

Hey guys,

I want to get some more lift out of my hilux.

It currently has a 2" BD, 2" spring lift.

I am looking at doing either extended shackles or dropped front hangers...or maybe even both ?

Can I get away without having to get cross over steering ?

I just want another 2" of lift, so what would be the easiest, non-complicated way to do so ?

Cheers.
Posts: 141
Joined: Fri Feb 04, 2005 12:40 pm

Post by beefa125 »

mate im not trying to be a smartass but bigger tyres help..
Posts: 66
Joined: Fri Feb 11, 2005 2:36 am
Location: Sydney

Post by soo33y »

Forgot to mention I'm running 33's.

I don't think 35's will fit with my current set-up.

Cheers.
Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Post by +dj_hansen+ »

Why do you want more lift?

To fit 35's, it should be possible with 2" BL and 2" Springlift if you have your front housing moved forward 30mm+ and some bumpstop finetuning. This can be done with offset perches available from superior, or getting the holes redrilled in your spring packs.

Extended shackles are illegal remember...
Cheers,
Dan.

[i]1996 HDJ80R[/i]
Posts: 219
Joined: Fri May 19, 2006 5:29 pm
Location: sydney

Post by albey »

If you use rear leaf springs at the front, it will move your housing forward 50mm, I don't know what mods are needed for your steering because i put Hi steer in at the same time so you may need to look at what is needed. But anyway I ran 35's with just 3" BL and it was fine just scrubed a little doing U-turns.
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

if you move your diff to forwards you'll need to change it anyway because the drag link and tie rod will hit each other
turbos are nice but i'd rather be blown
Posts: 1340
Joined: Sat Feb 15, 2003 8:29 pm
Location: ACT

Post by diesel028 »

I am currently running a 2" BL, 2" ext shackles, 2" dropped hangars, rear springs up front (diff forwards 2") and whatever " the springs are. Im still using the std style steering setup, with the adjustable dropped draglink. its not a good steering setup for 6-7" of lift, but it is getting me round ok atm. the good news for me tho is my hi steer is just about to go on, probably in the next week or so (as soon as i can clean my garage enough for the truck to get in).

As soon as the pics are working again, ill post some up.

Or if ya want me to email them to you, PM me.

Cheers
Posts: 66
Joined: Fri Feb 11, 2005 2:36 am
Location: Sydney

Post by soo33y »

Hi diesel028,

Can you tell me why the dropped drag link isn't any good ?

Is it because of poor handling ?

Cheers.
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

Dude,
You will get to much bump steer out of a drop drag setup. You will end up busting ya thumbs if the wheels get caught in ruts. Go the cross over system. It is a piece of piss to do. If ya got the parts ready it whould only take ya a day.
Posts: 3349
Joined: Tue Nov 23, 2004 10:29 am
Location: Not where you are

Post by Gribble »

3 main reasons for fitting x over are.....

1. With the extra down travel you loose alot of steering because of the extreme angle the steering arm is on, a by product of that angle is the arm now rubs on the top of the unis (ie, bad)

2. The length of the torque rod and the leaf spring arent equal, and with extra travel this puts alot of tension on your torque rod mounts and the front spring hanger. One will eventually go, followed by the other, and im speaking from personal experiance here.

3. Bump steer, which has already been mentioned. This happens because the steering geometry is affected everytime the wheel moves up and down, not so much of an issue if your truck is at standard height and the steeering arm is parallel to the ground. You will still have bump steer in a x-over system where the arm is not parallel to the ground, but because the arm is now 3 times the length the effect is cut down by a 1/3rd and whatever percentage difference there is in the angle between the two, a very very notable difference not to mention a much safer one.
\m/
Posts: 66
Joined: Fri Feb 11, 2005 2:36 am
Location: Sydney

Post by soo33y »

I'm finding that my current set-up already has heaps of bump steer.

I've put on a new steering knuckle, ball joints and bushes. I'm running 33's, with the afformentioned 2" body lift and 2" springs.

I think my steering dampner is shot. Does the steering dampner make that much of a difference ? Especially with bump steer ?

Cheers.
Posts: 331
Joined: Thu Feb 17, 2005 9:49 am
Location: Albury

Post by roberts »

hey mate iv got a dropped drag link and adjustable diff locator for sale you will require both these iteams :D

if you go high steer , put some money away because it ant cheap :cry:
Posts: 3349
Joined: Tue Nov 23, 2004 10:29 am
Location: Not where you are

Post by Gribble »

soo33y wrote:I think my steering dampner is shot. Does the steering dampner make that much of a difference ? Especially with bump steer ?

Cheers.
It wont cure it, but it will slow down the reaction alot.
\m/
Post Reply

Who is online

Users browsing this forum: No registered users and 143 guests