Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
radiator??????
radiator??????
Hey guys my radiator is shot just wondering what my choices are
rebiuld/recon,second hand one what else would a gu one fit?
its for a tb42 carby
cheers paul
rebiuld/recon,second hand one what else would a gu one fit?
its for a tb42 carby
cheers paul
Got a new three core for my TD42 from Repco for $460 trade, obviously it will be more if you dont know anyone in the trade. Recore on my original 2 core from local Natrad was going to cost the same & they quoted 700 to recore it to three core. I went new, 2 years warranty & cheap to boot.
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Well they are all following you...
No they ain't, I'm just in front...............
I bought a complete new radiator from a Natrad dealer at the end of last year, which cost me $484 incl GST.
The part number was NIS973CMD. This is for a manual TD42 (GQ). From memory the petrol one is about the same cost.
So far it seems to be working pretty well. The only thing i wasn't really impressed with was the slightly smaller diameter (about 2mm) of the filler/cap neck, which makes the cap very hard to remove and install.
Hope that helps.
The part number was NIS973CMD. This is for a manual TD42 (GQ). From memory the petrol one is about the same cost.
So far it seems to be working pretty well. The only thing i wasn't really impressed with was the slightly smaller diameter (about 2mm) of the filler/cap neck, which makes the cap very hard to remove and install.
Hope that helps.
I had the same problem with mine, they need the correct size one fitted as mine failed on a tripnalucas wrote: The only thing i wasn't really impressed with was the slightly smaller diameter (about 2mm) of the filler/cap neck, which makes the cap very hard to remove and install.
Hope that helps.
Short GQ, Petrol, Turbo.
GQ TD42 ute
GQ TD42 ute
Who is online
Users browsing this forum: No registered users and 146 guests