Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

spring hangers

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

spring hangers

Post by bad_religion_au »

Anyone know a good place to get spring hangers (for a 40 series in particular) at a good price?
Spit my last breath
Top
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

BUBS
turbos are nice but i'd rather be blown
Top
Posts: 361
Joined: Sat Mar 06, 2004 11:09 pm
Location: Western Australia

Contact:
Contact toyrex

Post by toyrex »

Is this what you are looking for and what do you call a good price

http://img.photobucket.com/albums/v167/ ... _0062a.jpg

Adrian
www.chevtorque.com.au
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

toyrex wrote:Is this what you are looking for and what do you call a good price

http://img.photobucket.com/albums/v167/ ... _0062a.jpg

Adrian
www.chevtorque.com.au
nope, they look like shackles to me.

i'm talking the solid spring mount that bolts (is riveted from factory) to the chassis
Spit my last breath
Top
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

superior engineering, BBM, both do plain spring perches i think for 45 bucks each perch
turbos are nice but i'd rather be blown
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

chunderlicious wrote:superior engineering, BBM, both do plain spring perches i think for 45 bucks each perch
i don't want perches, i want the solid chassis mount spring hanger.

according to BBM they are 180 a pair.
Spit my last breath
Top
Posts: 789
Joined: Wed Aug 24, 2005 4:13 pm
Location: ACT

Post by CanberraMav »

They are $180 a pair at BBM i went through this not long ago with my Suzuki. They are $40 dollars each at Superior engineering but this is for a Hilux......I dont know if they have them for the Cruizer.

Its very easy to make them yourself. This is what i did in the long run. Cost me less than $10. Just cut them out of C or BOx section. If you cant find the right internal measurements (which i had trouble with) i just cut it down the centre then welded back together.

If that makes any sense
Mud_runner_GQ says:
I need 1.6 metre long shocks
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

CanberraMav wrote:They are $180 a pair at BBM i went through this not long ago with my Suzuki. They are $40 dollars each at Superior engineering but this is for a Hilux......I dont know if they have them for the Cruizer.

Its very easy to make them yourself. This is what i did in the long run. Cost me less than $10. Just cut them out of C or BOx section. If you cant find the right internal measurements (which i had trouble with) i just cut it down the centre then welded back together.

If that makes any sense
yep makes sense, thanks mate, i'll probably go this option i think.
Spit my last breath
Top
Posts: 89
Joined: Sat Dec 10, 2005 10:26 pm
Location: North Qld

Post by jcclures »

I have just finished my rear spring hangers on my Nissan, I used cold rolled channel and some 2-inch pipe, which I split and re welded, my cost were nothing as they came from scrap just my time.
Image
john
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests