Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
water in lights
Moderators: toaddog, TWISTY, V8Patrol, Moderators
water in lights
hey guys whats the best way to get water out of lights ive got about 1/3 of water in my headlights and 1/2 full in one of my spotties. i was thinking about drilling a small into the bottom to let the water drain.
Re: water in lights
Ruggers wrote:hey guys whats the best way to get water out of lights ive got about 1/3 of water in my headlights and 1/2 full in one of my spotties. i was thinking about drilling a small into the bottom to let the water drain.
Use sliastic...
usually once its in thats it!, no quick fix, so to speak, will ever return them to normal working order, I have high tide marks in both front headlights, and one spot due to cracking lenses. All my tail light sections take on water also, in the process of new front and rear bars and using sealed tail lights.
Higher lift usually equates to higher confidence thus deeper water x'ings.
Higher lift usually equates to higher confidence thus deeper water x'ings.
1985 LWB Suzuki Sierra, Lock-Rite Rear, SPOA, 2" Body Lift, Climax shackles, Rancho's,
Series 1 Rockhoppers, 31x11.5 MT'S, "To return from the dead very sooooon!"
[url]http://www.cyberdesigns.tk[/url]
[url]http://www.purefmx.tk[/url]
Series 1 Rockhoppers, 31x11.5 MT'S, "To return from the dead very sooooon!"
[url]http://www.cyberdesigns.tk[/url]
[url]http://www.purefmx.tk[/url]
Assuming headlights.
You can remove the globe and suck water out using a long clear plastic hose.
If they are real messy remove and rinse out with warm water and a small amount of dishwashing liquid.
DO NOT use any mechanical means, ie rag, brush etc, dont even slosh muddy water around too long as the reflective material is very unstable and will loose its shine.
Most light is reflected onto the road thru the top of the lens so a tide mark at the bottom wont affect light output.
To prevent further ingress ensure rubber boots are clean and seal drain hole in boot with silastic.
If you do a lot of water work a fine smear too along where boot meets back of light.
Bazzle
You can remove the globe and suck water out using a long clear plastic hose.
If they are real messy remove and rinse out with warm water and a small amount of dishwashing liquid.
DO NOT use any mechanical means, ie rag, brush etc, dont even slosh muddy water around too long as the reflective material is very unstable and will loose its shine.
Most light is reflected onto the road thru the top of the lens so a tide mark at the bottom wont affect light output.
To prevent further ingress ensure rubber boots are clean and seal drain hole in boot with silastic.
If you do a lot of water work a fine smear too along where boot meets back of light.
Bazzle
Who is online
Users browsing this forum: No registered users and 0 guests