Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

hilux heater not working..

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 445
Joined: Sun Oct 31, 2004 9:23 am
Location: Perth

hilux heater not working..

Post by BadLux »

Hey all, my heater in my hilux has stopped working.. The fan goes and everything but the air isn't hot anymore.. It goes slightly warmer when you move the gauge to hot, but by far nothing like it should be.

Anyone have any ideas on whats wrong?

Cheers :lol: '

p.s it's starting to get really cold in the morning and i'm gettin really pissed off not having a heater!!!
Top
Posts: 2472
Joined: Tue Jun 01, 2004 4:17 pm
Location: Blaxland... Just up from Renriff!

Contact:
Contact -Nemesis-

Post by -Nemesis- »

Did you check all the hoses for crimps or blockages?
Lovin the FZJ105-T, bling by Ryano
Top
Posts: 88
Joined: Tue May 23, 2006 7:44 pm
Location: brisbane

Post by eye-for-detail »

get someone to check if your heater tap if moving while you change your temperature on the slider. if it isnt then you probably done a cable and/or your taps' siezed
LN106 d/cab, 2in lift, 32s, airlocker,
Top
Posts: 445
Joined: Sun Oct 31, 2004 9:23 am
Location: Perth

Post by BadLux »

ok so the taps in the engine bay about 15cm away from the fuel pump attached to the firewall? Yeh thats not moving? However in the cab below the glovebox to the right, near the instrument cluster in the middle. Theres a white lever that corrisponds to the movement of the heater/cool gauge. ??
Top
Posts: 2472
Joined: Tue Jun 01, 2004 4:17 pm
Location: Blaxland... Just up from Renriff!

Contact:
Contact -Nemesis-

Post by -Nemesis- »

Pulling that leaver simply opens and closes the tap. Start at one end (either the tap or the lever) and follow the cable/linkages untill you find where it's faulty.....
Lovin the FZJ105-T, bling by Ryano
Top
Posts: 445
Joined: Sun Oct 31, 2004 9:23 am
Location: Perth

Post by BadLux »

FARK! I frikken ended up breaking the lever now that you slide to go from hot to cold. The lever in the engine bay, the one that connects to the coolant systems not moving. Maby a cable has snapped somewhere?
Top
Posts: 88
Joined: Tue May 23, 2006 7:44 pm
Location: brisbane

Post by eye-for-detail »

just guessing from here but i reckon its the tap
if youve broken the lever then a snapped cable would have probably made it easier to move
take the cable off the heater tap and see if you have full or any travel on the tap lever.
if you do then pretty good chance your cable is kinked somewhere
LN106 d/cab, 2in lift, 32s, airlocker,
Top
Posts: 445
Joined: Sun Oct 31, 2004 9:23 am
Location: Perth

Post by BadLux »

fixed it.. The cable had seized and then snapped by the slising mechanism. Took bout 3hrs but she's all fixed. Gotta take a fair bit of the dash off to get to it!!
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests