Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

10,000 or 12,000 winch

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 655
Joined: Fri Nov 22, 2002 8:00 am
Location: Cranbourne, Victoria

10,000 or 12,000 winch

Post by bundyrum4x4 »

I currently run an old 10,000 warn wich on a long Mav. I have the option of getting a 12,000 warn only used once by a lifting company for the right price. The current winch works perfectly but by getting the new bigger winch I gain the bigger 4.6 motor and more pulling power though I will gain some more waight over the front. Is it worth changing over? :?:
Posts: 1119
Joined: Mon Dec 16, 2002 4:24 pm
Location: Neither here nor there

Post by TuffRR »

I doubt it. There are question marks over the reliability of the newer 4.6hp motor and if you have had no problems with your current one I would just keep that.
I doubt that extra 2000lbs capacity would help much especially if winching with a snatch block.
I changed from a 10,000lb low mount to the 8000lb high mount and don't regret it - it is much faster and is better to use with Plasma rope.
Posts: 655
Joined: Fri Nov 22, 2002 8:00 am
Location: Cranbourne, Victoria

Post by bundyrum4x4 »

Thanks TuffRR, sort of what I was thinking. I have looked at going to the high mount but funds are currently going towards a turbo. The only reason I considered this is that I could get my money back on the 12000 by selling the 10000. I may even have made a little profit.
Posts: 1119
Joined: Mon Dec 16, 2002 4:24 pm
Location: Neither here nor there

Post by TuffRR »

Keep an eye out for a cheap second hand high mount. I sold my 10,000lb low mount and with the funds bought a 8,000lb high mount, had it competition prepared (ie breathers, braced, upgrade brake etc) and got 45 metres of plasma rope. :lol: :lol: :lol:
Posts: 655
Joined: Fri Nov 22, 2002 8:00 am
Location: Cranbourne, Victoria

Post by bundyrum4x4 »

What did you get for your 10,000?
Posts: 1119
Joined: Mon Dec 16, 2002 4:24 pm
Location: Neither here nor there

Post by TuffRR »

$1,100 off the top of my head. That was with two winch cables and in good condition. I think i was lucky to get that much for it. :D
Posts: 26
Joined: Fri Nov 08, 2002 8:04 am

Post by max200tdi »

Isn't a 12,000 just a 10,000 with lower gearing & a bigger diamater cable?
Posts: 655
Joined: Fri Nov 22, 2002 8:00 am
Location: Cranbourne, Victoria

Post by bundyrum4x4 »

Same cable as the 10000 just different gearing, and slightly larger in size.
Posts: 146
Joined: Wed Nov 13, 2002 2:43 pm
Location: outside the migration zone

Post by Snatchy »

Just bought a Hi mount for $200. Works except needs new/reco motor. All rest in working order inc cable :D
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

Can some one tell me where the best place is to get plasma rope from and how much per meter I should be looking at. I am running a 9000lb warn lowmount.
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

buy it from the states your bank account will love you for it esp. if you can get it sent over on the sly

http://www.masterpull.com/ is a place to start looking
www.overkill4x4.com
ph 94766137
Posts: 1575
Joined: Mon Oct 21, 2002 1:17 pm

Post by Singo17 »

V8Patrol wrote:Can some one tell me where the best place is to get plasma rope from and how much per meter I should be looking at. I am running a 9000lb warn lowmount.



Around $11 a metre for 8mm and around $15 for 9mm you will need 9mm for comps as there is usually a restriction on use of 8mm.

Can't remembr the name of the distributor in Victoria I will do a search for ya.

Janrak Equipment (03) 9877 8378

Can't find a Web site but I swore I have seen the prices listed somewhere maybe in one of the 4x4 mags prolly 4x4 monthly. Yeah definately in one of them don't have one at hand but I am sure in the last couple of months it has been in the Hardcore equipment section.
Official member of the Babinda Jimmy James Beam III Fan Club

Darth Bobo Honker Hunter Inc, for the up gunned Poodlefaker.

:armsup:"ARMS UP":armsup:
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

Thanks guys am on to it :D
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Post Reply

Who is online

Users browsing this forum: No registered users and 151 guests