Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

60 series axle studs?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 61
Joined: Mon Jan 17, 2005 8:15 pm
Location: sunshine coast

60 series axle studs?

Post by croozer »

hey guys,
i have a HJ61 with the 12HT in it and i have lifted it etc and i have a locker in the front and the rear of it and i keep snapping rear axle studs what can i do to stop this i have tries drilling the holes out and putting 100 series studs in but that was unxuccessful i still snapped the studs have i done something wrong am i retarded or what can i do.
any help is good help and would be grateful thanx heaps
Top
Posts: 211
Joined: Mon Aug 30, 2004 12:44 pm
Location: "the shire"

Post by quick60 »

Get a straight axle. When they're bent they keep snapping the studs.
Damian.

should I swim it first ?
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

do you torque the studs down pretty much every day for a few weeks after installing them?
Spit my last breath
Top
Posts: 701
Joined: Tue Feb 03, 2004 3:04 pm
Location: Melbourne

Post by 80UTE »

Ive been doing this coversion for years now and never had one come back with stud problems. when you fitted the studs were the axles modified to suit the 100 collets or did you not fit collets? you have done some thing wrong or something is bent etc.

Wally.
THERES ONLY ONE SUBSTITUTE FOR CUBES AND THATS MORE and if you want more inchs stroke it !!!!!!!!!!!
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

did you still fit the cone washers? without the cone washers even 100series studs will probably be a weaker system than 60series studs with cone washers.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests