Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Endless air type setup on GU TD
Endless air type setup on GU TD
Does anybody have any pics or info on fitting a second aircon compressor to a 4.2 Diesel GU to use as a compressor. I have all of the tech type stuff (type of compressor, how to set it up eg.) Just no idea where to fit it (I have searched - no GU info)
Andrew,
Not sure if the GU has the same spare space under the injector pump as on my GQ TD42 but I've set up the OBA on mine on the drivers side of the engine underneath the injector pump and used a longer belt for it and the power steering pump. Fabricated two brackets to suspend it off the P/S mounting point and braced back to the engine block. It was a little more fiddly installing it down there, but I thought it was better then trying it sqeeze it in near the alternator and second battery. The hardest job I had was trying to find a compressor that would fit the space without pointing the hose fitting straight at the engine mount, or steering box, or fouling on anything else.
Squire
Not sure if the GU has the same spare space under the injector pump as on my GQ TD42 but I've set up the OBA on mine on the drivers side of the engine underneath the injector pump and used a longer belt for it and the power steering pump. Fabricated two brackets to suspend it off the P/S mounting point and braced back to the engine block. It was a little more fiddly installing it down there, but I thought it was better then trying it sqeeze it in near the alternator and second battery. The hardest job I had was trying to find a compressor that would fit the space without pointing the hose fitting straight at the engine mount, or steering box, or fouling on anything else.
Squire
I have some pics from a GU TD42 and a dimensioned drawing lying around somewhere.
I'll try and find it and can probably email it if you like.
From my understanding, you can use a very similar bracket on a GQ, but you have to modify the mounts under the a/c compressor as they mount up slightly differnt.
Nathan
I'll try and find it and can probably email it if you like.
From my understanding, you can use a very similar bracket on a GQ, but you have to modify the mounts under the a/c compressor as they mount up slightly differnt.
Nathan
I have mounted a piston type (can't remember what they are called,getting old.) on the left side, under the alt. I hook up the belt to the alt when i want to use it. I also have 12 volt for those small jobs but when doing all tyres and caravan i use the big one.
GU 4.2TD
wagon.
looking for that perfect route?
wagon.
looking for that perfect route?
I believe the brackets are $350 plus the compressor.does anyone know how much the endless air bought setup costs to buy including all bracketry/belts etc? (couldnt be bothered with the hassle of DIY with all the bits & pieces)
I recently installed one in a 4.2GUIII using the Sandon 508, the only hassle is the cross member near the radiator requires some alterations. The non intercooled GUs the cross member is not a problem.
I was trying to make some brackets to suit the Sandon 508 last year but other things took priority. I should have some finished in the next 4-6 weeks if anyone is interested.
Very very interested (depending on how difficult it is to setup. Except i have 3.0TD... Is the sanden 508 what's used for the "endless air" compressors? (I didnt want to have to find one from wreckers, drill & tap & lube etc, just buy endless air one with fittings etc)sootygu wrote:I believe the brackets are $350 plus the compressor.does anyone know how much the endless air bought setup costs to buy including all bracketry/belts etc? (couldnt be bothered with the hassle of DIY with all the bits & pieces)
I recently installed one in a 4.2GUIII using the Sandon 508, the only hassle is the cross member near the radiator requires some alterations. The non intercooled GUs the cross member is not a problem.
I was trying to make some brackets to suit the Sandon 508 last year but other things took priority. I should have some finished in the next 4-6 weeks if anyone is interested.
So if i can do that with one of your brackets without modifying guards/radiator supports etc that would be great!
All the gear, No idea...
Who is online
Users browsing this forum: No registered users and 113 guests