Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Do I need a lift for 33's,GU
Do I need a lift for 33's,GU
Burst a tyre this morning.Gunna replace the whole lot.Can I fit 33's under a GU Coil Cab without a lift?Will they rub?
Cheers
Cheers
So Many Cats,So few Recipies
Posts: 1931
Joined: Sun Jun 22, 2003 10:29 am
Joined: Sun Jun 22, 2003 10:29 am
Location: Everything 4WD, 86 Camms Rd Cranbourne
Contact:
Correct. The 305 is pretty much the same as the 33"x12.5".
The 285's or similar to a 33"x11.5".
THe 285's will fit better with no lift but you will get rubbing at the rear with full compression. Nothing to worry about tho.
The 285's or similar to a 33"x11.5".
THe 285's will fit better with no lift but you will get rubbing at the rear with full compression. Nothing to worry about tho.
My club
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
i got a 3 inch lift too but with 35s and havnt seen them scrub yet..troll01 wrote:i have 285/75/16 on my wagon, i have a 3 inch lift they look way to small. but they do still scrub in the back under full compression there is no trouble in the front..
what offset rims are you using?
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
i get slight scrubbing with my 33"s on std off set and to a lesser degree on my 35"s on cruiser of set (25mm i think from memory) , but when they tuck right up with the std bump stop there is no reason why they wouldn't and thats with 2" and 30mm coil spacers .j-top paj wrote:i got a 3 inch lift too but with 35s and havnt seen them scrub yet..troll01 wrote:i have 285/75/16 on my wagon, i have a 3 inch lift they look way to small. but they do still scrub in the back under full compression there is no trouble in the front..
what offset rims are you using?
if its worth doing do it intensly , better still do it with MADPASSION
set your limits way beyond your abilities
set your limits way beyond your abilities
Posts: 1931
Joined: Sun Jun 22, 2003 10:29 am
Joined: Sun Jun 22, 2003 10:29 am
Location: Everything 4WD, 86 Camms Rd Cranbourne
Contact:
I had 3" suspension and a 2" body lift and still had my 35's rubbing on full compression.j-top paj wrote:i got a 3 inch lift too but with 35s and havnt seen them scrub yet..troll01 wrote:i have 285/75/16 on my wagon, i have a 3 inch lift they look way to small. but they do still scrub in the back under full compression there is no trouble in the front..
what offset rims are you using?
Maybe the compressed length of your shock are too long...?
My club
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
I have a 3" lift and my 33 x 12.5 x 15's rub on the passenger side rear at full FULL compression. That said on full extension my springs pop out indicating my shocks are too long so this would be adding to the problem. Also no adj. panhard which is why it only rubs on one side...
All the gear, No idea...
im running a negative 22 offset and they seem to work fine. the lift is a dobbinsons kit.
i think they guy at the tyre shop was saying something about the standard nissan rims being a positive 5 offset... that may be the problem with scrubbing?
i think they guy at the tyre shop was saying something about the standard nissan rims being a positive 5 offset... that may be the problem with scrubbing?
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
Who is online
Users browsing this forum: No registered users and 114 guests