Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Do I need a lift for 33's,GU

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 160
Joined: Tue Apr 11, 2006 11:45 am
Location: Sydney

Do I need a lift for 33's,GU

Post by Buckshot »

Burst a tyre this morning.Gunna replace the whole lot.Can I fit 33's under a GU Coil Cab without a lift?Will they rub?
Cheers
So Many Cats,So few Recipies
Top
User avatar
DBW
Posts: 113
Joined: Tue Feb 24, 2004 8:43 pm
Location: Sydney Australia

Contact:
Contact DBW

Post by DBW »

Nah, you'll be right Bucky. My 33's fit stock no worries. YOu can fit 35's with a 2" lift and light scrubbing. I can't imagine the ute having less room around the rear.
Top
Posts: 160
Joined: Tue Apr 11, 2006 11:45 am
Location: Sydney

Post by Buckshot »

Cheers Dan!
So Many Cats,So few Recipies
Top
Posts: 17
Joined: Tue Jan 10, 2006 7:58 pm
Location: Melb

Post by stack »

go the 285/75/16 the fit fine same as 33
stack
Top
Posts: 160
Joined: Tue Apr 11, 2006 11:45 am
Location: Sydney

Post by Buckshot »

stack wrote:go the 285/75/16 the fit fine same as 33
Is that the size of the standard Nissan Steel Rim?
So Many Cats,So few Recipies
Top
Posts: 236
Joined: Thu Apr 27, 2006 9:40 pm
Location: Gippsland, Vic

Post by currentlyoffline »

Buckshot wrote:
stack wrote:go the 285/75/16 the fit fine same as 33
Is that the size of the standard Nissan Steel Rim?
That size is very close to being the metric equivalent to a 33"
Top
Posts: 447
Joined: Mon Dec 15, 2003 8:44 am
Location: Townsville

Post by BigMav »

Thats the tyre size for a 33" tyre on a 16" rim measured in metric instead of imperial, stock gu rims are 16 x 8 so this is what you need.
1989 Ford Maverick Turbo Diesel Tourer
4" spring lift 2" body lift
33" MT/R's
Top
Posts: 447
Joined: Mon Dec 15, 2003 8:44 am
Location: Townsville

Post by BigMav »

just beat me :finger:
1989 Ford Maverick Turbo Diesel Tourer
4" spring lift 2" body lift
33" MT/R's
Top
Posts: 1344
Joined: Thu Jan 12, 2006 10:12 am
Location: sydney

Contact:
Contact sniper

Post by sniper »

isnt a 305/70/16 also a 33, just wider the the 285/75/16 ? :?
LANDCRUISER GXL 80series 4.2TD
[url=http://www.rag4x4.com]R.AG. 4X4 Club
RUFF~AS~GUTS[/url]
Top
Posts: 1931
Joined: Sun Jun 22, 2003 10:29 am
Location: Everything 4WD, 86 Camms Rd Cranbourne

Contact:
Contact GUJohnno

Post by GUJohnno »

Correct. The 305 is pretty much the same as the 33"x12.5".
The 285's or similar to a 33"x11.5".

THe 285's will fit better with no lift but you will get rubbing at the rear with full compression. Nothing to worry about tho.
My club
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

285's are available in more remote locations than 305's... somethin to keep in mind.

fitted mine last week, but 285/75's wont fit on the rear door without hitting. hadda get the ARB spacer thingy
Top
Posts: 564
Joined: Wed Apr 19, 2006 4:55 pm
Location: Brisbane

Contact:
Contact Potter

Post by Potter »

i have 285/75/16 on my wagon, i have a 3 inch lift they look way to small. but they do still scrub in the back under full compression there is no trouble in the front..
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

troll01 wrote:i have 285/75/16 on my wagon, i have a 3 inch lift they look way to small. but they do still scrub in the back under full compression there is no trouble in the front..
i got a 3 inch lift too but with 35s and havnt seen them scrub yet..
what offset rims are you using?
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 775
Joined: Tue Mar 18, 2003 8:10 pm
Location: under the wifes thumb

Post by zookjedi »

j-top paj wrote:
troll01 wrote:i have 285/75/16 on my wagon, i have a 3 inch lift they look way to small. but they do still scrub in the back under full compression there is no trouble in the front..
i got a 3 inch lift too but with 35s and havnt seen them scrub yet..
what offset rims are you using?
i get slight scrubbing with my 33"s on std off set and to a lesser degree on my 35"s on cruiser of set (25mm i think from memory) , but when they tuck right up with the std bump stop there is no reason why they wouldn't and thats with 2" and 30mm coil spacers .
if its worth doing do it intensly , better still do it with MADPASSION

set your limits way beyond your abilities
Top
Posts: 1931
Joined: Sun Jun 22, 2003 10:29 am
Location: Everything 4WD, 86 Camms Rd Cranbourne

Contact:
Contact GUJohnno

Post by GUJohnno »

j-top paj wrote:
troll01 wrote:i have 285/75/16 on my wagon, i have a 3 inch lift they look way to small. but they do still scrub in the back under full compression there is no trouble in the front..
i got a 3 inch lift too but with 35s and havnt seen them scrub yet..
what offset rims are you using?
I had 3" suspension and a 2" body lift and still had my 35's rubbing on full compression.
Maybe the compressed length of your shock are too long...?
My club
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
Top
User avatar
Dee
Posts: 2314
Joined: Thu Mar 10, 2005 1:35 pm
Location: Sunny Coast, QLD

Post by Dee »

I have a 3" lift and my 33 x 12.5 x 15's rub on the passenger side rear at full FULL compression. That said on full extension my springs pop out indicating my shocks are too long so this would be adding to the problem. Also no adj. panhard which is why it only rubs on one side...
All the gear, No idea...
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

well I just chucked my 33 x 10.50s on my GU yesterday with no lift and they fit no dramas. looks like they should fit under articulatiuon as well
Ransom note = demand + collage
Top
Posts: 564
Joined: Wed Apr 19, 2006 4:55 pm
Location: Brisbane

Contact:
Contact Potter

Post by Potter »

im just running stock 16x8's
and they rub both sides
i mite lok at gtting bigger offset
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

im running a negative 22 offset and they seem to work fine. the lift is a dobbinsons kit.

i think they guy at the tyre shop was saying something about the standard nissan rims being a positive 5 offset... that may be the problem with scrubbing?
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 564
Joined: Wed Apr 19, 2006 4:55 pm
Location: Brisbane

Contact:
Contact Potter

Post by Potter »

thanks ill have a look into it when i upgrade my tyres..
do 15 inch sunnies fit on?
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

I'm using the 15 x 7 sunnies on mine
Ransom note = demand + collage
Top
Posts: 564
Joined: Wed Apr 19, 2006 4:55 pm
Location: Brisbane

Contact:
Contact Potter

Post by Potter »

cool as i think i mite try and get some 15 x 10's
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

yeh 15x8 sunnies for me
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 8 guests