Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

ARB Bar to Winch bar - clues

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 22
Joined: Mon Jan 09, 2006 5:05 pm
Location: Geelong

ARB Bar to Winch bar - clues

Post by ARangie »

I've got myself a ARB STD bar to suit my 85 Rangie. I need to mod it to fit a winch and the body lift.

I can work off photo's for the front gussets, but it would help if I had a photo or know how the winch plate was mounted.

Is the winch plate welded in postion or is it bolted, is it 5mm thick or 4mm there should be some gussets too.

Email me any photo's you may have of the inside of the bar.



One other thing. Is the winch mounted with the mounts facing down or forward. Cause if I mount it it down I will need more bracing, and if I mountit with mounts forward it will be hard to get the clutch, cause my cheapy winch does not offer adjustment.
Last edited by ARangie on Sun Jun 18, 2006 6:38 pm, edited 2 times in total.
Town Vehicle - 02 TD5 SE Disco
Top
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Contact:
Contact cloughy

Post by cloughy »

Why not just build a cradle out of 8mm plate that goes inbetween your chassis rails, that way no mods (except hole for fairlead) to the bar and a damn sight easier and quicker
Wanted: Car trailer or beaver tail truck, let me know what you got
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 34 guests