Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

34s with a 3"lift

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 13
Joined: Thu Jul 14, 2005 6:00 pm
Location: Perth, Western Australia

34s with a 3"lift

Post by Golding »

hey all.

im going to get some play rubber for my 80 series cruiser soon.

i was thinking 33s, but id like to get some 34s.
so my question is, does 34" rubber rub with a 3" suspension lift?
i know 35s do, but no idea on 34s.

there just for play, ill keep my 31s for on road

any help would be good,

thanks in advance
Top
Posts: 780
Joined: Wed Apr 26, 2006 7:11 pm
Location: darwin again

Post by simkell »

yeah they should my fit ok, only occassionaly they rub on the mud flaps.
all i did was trim a little bit off the inside of the mud flap, never had the problem since.
Top
Posts: 23
Joined: Wed Oct 13, 2004 3:47 pm
Location: Perth

Post by FourSpin »

golding you bum :lol:

u going simexes ??? ET2 ???
Top
Posts: 305
Joined: Mon Oct 17, 2005 10:22 am
Location: BRISVEGAS

Contact:
Contact JOHNZ

Re: 34s with a 3"lift

Post by JOHNZ »

Golding wrote:hey all.

im going to get some play rubber for my 80 series cruiser soon.

i was thinking 33s, but id like to get some 34s.
so my question is, does 34" rubber rub with a 3" suspension lift?
i know 35s do, but no idea on 34s.

there just for play, ill keep my 31s for on road

any help would be good,

thanks in advance
34s are no problem on 80s with a true 3" lift.
cheers Johnz
LOVELLS-EFS-DOBINSON-PROCOMP-BILSTEIN-KONI-RANCHO-TOUGHDOG-BLUEMAX
COIL SPACERS from $46pr
4WD SUSPENSION & BODYLIFTS 0418780611 A/H PH/FAX 07 33512692 - www.zordos4wdsuspension.com.au
Top
Posts: 849
Joined: Fri Apr 23, 2004 12:30 pm
Location: Mornington, Vic

Contact:
Contact MYTTUF

Post by MYTTUF »

I used to run 34 X 11.5 JT2s with a 2inch spring lift and 30mm coil spacers and 7inch rims. They would occasionally touch on the inside of the rear wheel well on up travel. I now have a 4inch coil lift and run Q78s with no major issues.
My vehicle of choise is a Std 94 model 80 without flairs or mud flaps.
Hope tis helps
Jonesy
80 series, Locked both ends, Q78ed & a massive 57 k/w to boot!!!!

www.autobalance.com.au
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 99 guests