Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Diff Centre Swap

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
User avatar
DIRTY ROCK STAR
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

Diff Centre Swap

Post by DIRTY ROCK STAR »

Does an 80 series rear centre fit in a 40 rear housing?
and if yes, can it use the same axles??


cheers..

and if anyone says to search i will donkey slap them.

DRS
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
Top
User avatar
RAY185
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

Was told once that the centre will fit but the side gears are different and need to be changed to accept 40 axles. However I pulled out a rear axle and tried it in an 80 centre and it fit perfect so I'm leading towards a big fat YES but lets see what other have to say. We are talking full floater rear on the 40 arent we?

Ray
Top
Posts: 88
Joined: Tue May 23, 2006 7:44 pm
Location: brisbane

Post by eye-for-detail »

as ray said with the full floater and yes it will fit
80 ser are 41x10= 4.1 ratio
40,55 ,60, 75 are 37x9=4.11 ratio
LN106 d/cab, 2in lift, 32s, airlocker,
Top
Posts: 300
Joined: Sun Feb 15, 2004 4:48 pm
Location: Penrith {Sydney} NSW

Re: Diff Centre Swap

Post by tuff 45 »

DIRTY ROCK STAR wrote:Does an 80 series rear centre fit in a 40 rear housing?
and if yes, can it use the same axles??


cheers..

and if anyone says to search i will donkey slap them.

DRS

I put a 80 series LSD in the back of my 40 with the 40 crown wheel and pinion and the axels went str8 in, they are the same.
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

LOL
I put a 60 centre in my 80...with 5.29 gears...straight in....
A guy with a 1995 troupy busted his diff at Appin, it was an old 60 diff centre....yes they go straight in...if your 40 was semi floating as in early std diffs, it wouldnt...
Top
Posts: 706
Joined: Fri Dec 31, 2004 10:31 am
Location: some where between armidale and sydney.....

Post by TYLER »

im guessing that the 5.29 out of the 60 was std????
[b][i][u][color=#0000BF] just another nutter with a hilux [/color][/u][/i][/b]
Top
User avatar
DIRTY ROCK STAR
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

Post by DIRTY ROCK STAR »

cheers guys thats what i like to see, quick accurate info
AND you all said YES, that means i can go buy stuff! SHWEEEET!

cheers!
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

DIRTY ROCK STAR wrote:cheers guys thats what i like to see, quick accurate info
AND you all said YES, that means i can go buy stuff! SHWEEEET!

cheers!
as long as they're not factory locker centers, then yes they'll work. your pinion flange might be a different bolt pattern
Spit my last breath
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

TYLER wrote:im guessing that the 5.29 out of the 60 was std????
Nah...to get 5.29, you need a 37 ring and a 7 pinion....which all fits in a 60 housing. Front 80 gears were from the states.
Andrew
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

dow50r wrote:
TYLER wrote:im guessing that the 5.29 out of the 60 was std????
Nah...to get 5.29, you need a 37 ring and a 7 pinion....which all fits in a 60 housing. Front 80 gears were from the states.
Andrew
is that a mix of factory bits (the 7 tooth pinion and 37 tooth ring)? or custom made/ aftermarket?
Spit my last breath
Top
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

So will a detroit from a 75 fit an 80?
Tetanus rolling on 37's
Top
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Contact:
Contact cloughy

Post by cloughy »

bad_religion_au wrote:
dow50r wrote:
TYLER wrote:im guessing that the 5.29 out of the 60 was std????
Nah...to get 5.29, you need a 37 ring and a 7 pinion....which all fits in a 60 housing. Front 80 gears were from the states.
Andrew
is that a mix of factory bits (the 7 tooth pinion and 37 tooth ring)? or custom made/ aftermarket?
:rofl: Crown wheel and pinions are matched sets and the different tooth counts won't mesh
Wanted: Car trailer or beaver tail truck, let me know what you got
Top
Posts: 734
Joined: Sun Mar 06, 2005 5:25 pm
Location: Sunshine Coast Queensland

Post by midi73 »

dogbreath_48 wrote:So will a detroit from a 75 fit an 80?
I am putting an ARB locker into a 75 out of an 80. I just need to use the 80 bearings.
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

cloughy wrote:
bad_religion_au wrote:
dow50r wrote:
TYLER wrote:im guessing that the 5.29 out of the 60 was std????
Nah...to get 5.29, you need a 37 ring and a 7 pinion....which all fits in a 60 housing. Front 80 gears were from the states.
Andrew
is that a mix of factory bits (the 7 tooth pinion and 37 tooth ring)? or custom made/ aftermarket?
:rofl: Crown wheel and pinions are matched sets and the different tooth counts won't mesh
thought that, but considering he made special mention of the front being aftermarket, wondered what was going on with the rear
Spit my last breath
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 22 guests