Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

diy hawse fairlead ?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

diy hawse fairlead ?

Post by Loanrangie »

Has anyone made their own steel hawse fairlead for use with steel cable ?
Any reason why not to make one and buy one off the shelf ?

Nick.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 1423
Joined: Thu May 26, 2005 7:00 pm
Location: Central Coast, NSW

hawse

Post by klrevo »

deinitely thought of doing this Nick, got access through dads engineering firm for cnc, lathes and machines and also probably couldve got one of the guys iv done some work experience for who do most of dads work to knock something up after looking at the prices of one out of aus, ~$115 or somewhere round there was what i was looking at buying off the shelf, but i picked up one off ebay for $32, so i guess we'll see how good it is when i get it tomorrow... :? it was from extremelimitsoffroad ebay store,

dean ;)
Top
Posts: 50
Joined: Wed May 18, 2005 10:44 pm
Location: melbourne

Post by playtime 4x4 »

Yeah, i buoght one from some bloke on ebay as well. Did not match bolt holes and slot together so i gave it to a mate. He abused the s@$#%^& out of me cuase it didn't fit. So be aware. Decided to put the CNC mill to work and chomp some out. Should be ready in a couple of days,(other work on mill), for sale.
Dave
Top
Posts: 2931
Joined: Mon Jun 21, 2004 2:43 pm
Location: Brisbane

Post by grazza »

Be nice to see Dave.
I just bought one, cast iron for $95 since the roller fairlead hung really low below the TJM T15 bar I have.

I am a little worried about steel cable with this and the friction heat but have been told it will be OK.
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

My old man has a mill and lathe so i can machine anything i need, will 10mm plate be ok to use with cable ? If i can get one for similar price off ebay it would be easier than making one i guess.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 2136
Joined: Mon Dec 01, 2003 6:36 pm
Location: Lake Macquarie

Post by 4sum4 »

Loanrangie wrote:My old man has a mill and lathe so i can machine anything i need, will 10mm plate be ok to use with cable ? If i can get one for similar price off ebay it would be easier than making one i guess.
Good luck!,you need the right tool$,I got some from sky manufacturing in the USA when they first got`em $50ea, or you can get buy some elbow`s and some tube to make one
[url=http://downunder4x4.net/forum/showthread.php?t=1650]86 Hilux[/url]
and a 84 extra cab



If Rocks Had P^ssies Our Lives Would Be Perfect :D...
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

grazza wrote:Be nice to see Dave.
I just bought one, cast iron for $95 since the roller fairlead hung really low below the TJM T15 bar I have.

I am a little worried about steel cable with this and the friction heat but have been told it will be OK.
Cast Hawse leads are the only ones suitable for steel cable. They dont get as hot and friction is not a problem. If you use steel such as mild or an alloy steel it will gaul up and heat the cable very fast.
Top
Posts: 2066
Joined: Mon Jun 09, 2003 8:17 pm
Location: Gympie

Post by Rhett »

What about for plasma will mild be good enough?
Its a wheelbase thing
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Rhett wrote:What about for plasma will mild be good enough?
Should be fine as long as it has no sharp edges. We run Plasma style line around tube work with no problems. the Smoother the surface the better for rope.
Top
Posts: 88
Joined: Tue Nov 23, 2004 10:57 am
Location: melbourne

Post by bradley »

playtime 4x4 wrote:Yeah, i buoght one from some bloke on ebay as well. Did not match bolt holes and slot together so i gave it to a mate. He abused the s@$#%^& out of me cuase it didn't fit. So be aware. Decided to put the CNC mill to work and chomp some out. Should be ready in a couple of days,(other work on mill), for sale.
Dave
HI Dave, are these ally jobs you are making ? if so what material spec and hardness ?

I was going to make one at my work but we dont have any suitable material in stock at the moment, dunno how long i'd have to wait.
I need to replace my warn rollers because it has plasma fitted.
So, what sort of bikkies are you thinking ?

cheers Brad
Top
Posts: 1544
Joined: Fri Jan 03, 2003 10:33 am
Location: Wahgunyah(REDNECK WONDERLAND) Victoria

diy

Post by Webbie »

Rhett wrote:What about for plasma will mild be good enough?
The HDPE ones would be the go for Plasma l think.
Lockers or Knockers ,both will make for fun.

HYBRID 4B PRDUCTS Visit Tigerz11 here http://www.tigerz11.com.au/ and LOCKTUP 4x4 here http://www.locktup4x4.com.au/ cheers

www.trailtrack4x4.com
Top
Posts: 701
Joined: Tue Feb 03, 2004 3:04 pm
Location: Melbourne

Post by 80UTE »

I made mine from 316 stainless steel its 25mm thick and has i large smooth radius on both side to ensure no potential for sharp edges. Its been on for 4 years now and the rope with dirt on it has lapped it real smooth now so friction is minimal as its has not worn at all. If the material is wearing that means its heating up, so that needs to be avoided.


Wally.
THERES ONLY ONE SUBSTITUTE FOR CUBES AND THATS MORE and if you want more inchs stroke it !!!!!!!!!!!
Top
Posts: 50
Joined: Wed May 18, 2005 10:44 pm
Location: melbourne

Post by playtime 4x4 »

Sorry about the delay folks. Brad , we will use T6 structural alloy and no i have not sorted out a price yet, but want to try and keep it under 100 for forum users. I will post it in Misc. items for sale

Dave
Top
User avatar
Tiny
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Contact:
Contact Tiny

Post by Tiny »

make a foam patern and get a few cast, there is a few people around shop that could help, it is an easy pattern
If the above post did not offend you in any way please PM me so I can try harder!!
Top
Posts: 1119
Joined: Wed Apr 14, 2004 10:03 am
Location: Melbourne, looking at the hills for snow

Post by LOCKEE »

Genuine Warn Hawse (Cast Steel) should be avilable from your local 4wd shop for around $65. If they don't have them, tell them to call Ateco.
Top
Posts: 2066
Joined: Mon Jun 09, 2003 8:17 pm
Location: Gympie

Post by Rhett »

my home made fairlead for rope. bit more polishing up and it will be smooth as ;)

http://i80.photobucket.com/albums/j199/ ... C01654.jpg

http://i80.photobucket.com/albums/j199/ ... C01655.jpg
Its a wheelbase thing
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 94 guests