Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

HIDs just fitted them to my GQ

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 47
Joined: Mon Apr 17, 2006 10:57 am

HIDs just fitted them to my GQ

Post by TEAM FK »

and fark wat a difference it has made.. i love them.. mounting them is abit a bitch but me and a mate fitted them in 1.5 hours

the kit cost me 350 which is a great price i think :) would recommend them to anyone ill get some pics up asap
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Post by cloughy »

More info on the kit would be good :D
Wanted: Car trailer or beaver tail truck, let me know what you got
Posts: 60
Joined: Fri Sep 24, 2004 12:41 am
Location: Gold Coast, Sunny Qld

Post by D_Web »

Did you retrofit your existing housings to a projector setup so you don't blind other motorists, putting your safety and theirs at risk?
Posts: 2752
Joined: Wed Apr 09, 2003 10:46 pm
Location: Carrum Downs Vic

Post by CRUSHU »

D_Web wrote:Did you retrofit your existing housings to a projector setup so you don't blind other motorists, putting your safety and theirs at risk?
What do you mean? What can you do to a standard round 7" semi sealed beam housing?
www.CVEPerformance.com

Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
Posts: 60
Joined: Fri Sep 24, 2004 12:41 am
Location: Gold Coast, Sunny Qld

Post by D_Web »

CRUSHU wrote:
D_Web wrote:Did you retrofit your existing housings to a projector setup so you don't blind other motorists, putting your safety and theirs at risk?
What do you mean? What can you do to a standard round 7" semi sealed beam housing?
Unfortunately, nothing.

When you put HIDs in a housing and lense designed for an incandescent globe, they behave completely differently. Because of the way each globe works, they both have different radiation patterns and need different housings to perform as they should. Simply putting a HID setup in a normal housing is bad. Light starts flying everywhere and the glare can be unbearable.

We all know what it's like looking in to somebodys high beam, now think of looking in to something three times as bright. At eye level. It's not good.
Posts: 2752
Joined: Wed Apr 09, 2003 10:46 pm
Location: Carrum Downs Vic

Post by CRUSHU »

My brothers BA Fairmont runs them ok, shines a lot of light onto the road, and aren't stupidly bright to oncoming traffic, unless he flics the high beams :twisted:
www.CVEPerformance.com

Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
Posts: 362
Joined: Sun Jun 15, 2003 9:50 am
Location: Melbourne

Post by amtravic1 »

cloughy wrote:More info on the kit would be good :D
I have looked at fitting an H4 kit to my Rangie, (89). because of the depth of the HID hi/lo globe kit I dont believe they will fit with out major butchering of the panel behind the lights, then thats where the batteries are as well. I have fitted some HID's to my old super oscar lights and am looking at using these as high beam with an H4 low only kit in the headlights. That means there will be a very bright light in front of the car and a huge flood of light on high beam. The super oscars are spead beams and dont appear to dazzle any more than the 100 watt halogen globes.
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests