Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

aircon question

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 2775
Joined: Thu Apr 13, 2006 8:59 pm
Location: Melbourne

aircon question

Post by GQ Bear »

Got '92 tb42e and I want to get rid of aircon condensor and either convert aircon pump into compressor or get endless-air pump.

Is it ok to just undo aircon plumbing and release gas or should it be done by aircon bloke?

Also what's involved in converting pump and is endless-air a better pump?

Also, anyone got any suggestions for a new airbox as the factory ones are too damn big, leak like seives and let too much water in?


Thanks
[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
Top
Posts: 2775
Joined: Thu Apr 13, 2006 8:59 pm
Location: Melbourne

Post by GQ Bear »

C'mon, many of you have done it. Share your knowledge
[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
Top
Posts: 736
Joined: Mon Mar 07, 2005 5:25 pm
Location: Redcliffe, Brisbane

Post by chops »

crack the nut on the compressor/firewall fitting, and stand back and keep your hands clear

it's a no-no, but everyone does it.. you're meant to get an aircon place to de-gas your system.. but that costs
1988 351W GQ wagon
Top
Posts: 2775
Joined: Thu Apr 13, 2006 8:59 pm
Location: Melbourne

Post by GQ Bear »

just so happens it has a loose connection ;)

any advice on converting pump to air compressor?
[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
Top
Posts: 150
Joined: Wed Mar 10, 2004 7:02 am
Location: Newcastle

Post by CB0569 »

What i did,was to drain all the oil out of the filler plug (in the body of the compressor).Once drained i put a grease nipple into the filler plug and refit the bolt.
I am now in the process of hooking up hoses and filters etc.
What i also did was the leave the original A/C compressor in position,(Good on a hot day),and put a 2nd compressor above the alternator.
BEST OF BOTH WORLDS!!!
Top
Posts: 2775
Joined: Thu Apr 13, 2006 8:59 pm
Location: Melbourne

Post by GQ Bear »

CB0569 wrote: What i also did was the leave the original A/C compressor in position,(Good on a hot day),and put a 2nd compressor above the alternator.
BEST OF BOTH WORLDS!!!
So have you put another pully on the alternator to spin the 2nd compressor??

got any pics?
[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
Top
Posts: 150
Joined: Wed Mar 10, 2004 7:02 am
Location: Newcastle

Post by CB0569 »

I`ll get some pics for you this weekend.
I used a single pulley behind a double pulley.
I had to twist the air cleaner a little bit to clear the compressor.
I am also thinking of putting a 2nd alt there as well BUT it is all still in the design stage so it doesnt look real appealing at the moment.
I hooked some A/C hoses onto it as a trial (with a belt set up as a temporary as well) and it took about 1 to 1.5 mins to pump up a 33 Mongrel from 18psi to 44 psi
Top
Posts: 192
Joined: Tue Dec 20, 2005 1:37 pm
Location: Brisbane

Post by spannercrab »

2nd compressor can also be mounted below fuel injection pump from engine mount bolt and run easily with a longer belt from the P/S pump ...

do a search for "endless air" in these forums ... there have been a few recent discussions ...
If it's worth doing - it's worth doing to excess ...
Top
Posts: 2775
Joined: Thu Apr 13, 2006 8:59 pm
Location: Melbourne

Post by GQ Bear »

spannercrab wrote:2nd compressor can also be mounted below fuel injection pump from engine mount bolt and run easily with a longer belt from the P/S pump ...

do a search for "endless air" in these forums ... there have been a few recent discussions ...
Just trying to visualise this. Wouldn't it get that full of mud and water that by the time you tried to use it the bearings were seized?
CBO569 Wrote:What i also did was the leave the original A/C compressor in position,(Good on a hot day),and put a 2nd compressor above the alternator.
BEST OF BOTH WORLDS!!!
Had another thought about this and i think i like it. Is it ok to use only one belt on alternator and use other pully to run second a/c compressor? and carry a spare belt.
[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 6 guests