Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

D1a 50mm Lift?

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 142
Joined: Mon Apr 24, 2006 6:33 am
Location: Hamilton Vic

D1a 50mm Lift?

Post by amshaw »

Anybody know of a good but cheap surplyer in Vic of Lovell Spings or King springs & Dobenson shock 's ?

Getting prices from all over for a 50mm Lift for our 9/97 Disco S1a, TDi 300, ARB winch bar with winch, only a barrier in the rear for now :roll:

Please dont tell what you have because Ive made up my mind ....as I found out there are shit loads of Brands, combos and prices out there....just want a basic lift. ;)
Andrew

'98 Disco TDi 300
'06 Rodeo 3L TDi Crewcab

"Put The Wet Stuff On The Red Stuff"
Top
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Post by Maggot4x4 »

PM 4WDstuff on this board, he is in QLD but I believe he offers free freight and his prices are fairly sharp.
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
Posts: 142
Joined: Mon Apr 24, 2006 6:33 am
Location: Hamilton Vic

Post by amshaw »

Yep, have been talking to Him...umm dont know if its ok to use his name or not... :? but a good bloke to talk too and got heaps of info to pass on. :)

He helped us wade through all the crap thats out there but without the hard sell on one brand or another...In fact the combo he thought would suit ME best , Ive been told by others that will be a very good set up for our needs. :cool:

Just doing a bit more window shopping before I hand over my cash. :roll: ;)

Plus Im scottish, so I need to hang onto my money as long as possible :finger: :P :roll: ;) :)

Just want be sure Im doing the right thing , one of my motto's is "Do It Right The First Time" :)
Andrew

'98 Disco TDi 300
'06 Rodeo 3L TDi Crewcab

"Put The Wet Stuff On The Red Stuff"
Top
Posts: 2910
Joined: Thu Jan 02, 2003 4:32 pm
Location: Brisbane

Post by -Mick- »

go with 4wdstuff :)
Top
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Post by Micka »

Stop faffing about and just buy the bloody lift :roll: :finger:

Its not that big a deal. When you finally realise that you should have done a 3" lift and 2" body lift in the first place to fit the 37" tyres, you won't be worried about how much you spend.

Buy it. Flog it. :twisted:


Then go bigger :armsup:


Micka
Top
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Contact:
Contact HSV Rangie

Post by HSV Rangie »

les richmond automotive.

In Melb

greatest range springs around.

Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Top
Posts: 142
Joined: Mon Apr 24, 2006 6:33 am
Location: Hamilton Vic

Post by amshaw »

Micka wrote:Stop faffing about and just buy the bloody lift :roll: :finger:

Its not that big a deal. When you finally realise that you should have done a 3" lift and 2" body lift in the first place to fit the 37" tyres, you won't be worried about how much you spend.

Buy it. Flog it. :twisted:


Then go bigger :armsup:


Micka
"More money than brains" comes to mind :finger: :P ;)
Andrew

'98 Disco TDi 300
'06 Rodeo 3L TDi Crewcab

"Put The Wet Stuff On The Red Stuff"
Top
Posts: 289
Joined: Mon May 29, 2006 8:27 pm
Location: carrum downs

Post by UrbanRedneck »

i have just done about 3.5 to 4" lift on my rangy and the only person i found that straight of the top of his head could help me with anything over 38mm was Wombat offroad in Ringwood 03 98700699. Top bloke who is keen to help and from what i found well priced. Used to be pro comp. I havent got very good memory with names but i think it was Shane hope this helps
have grinder will fit
www.4Bfabrications.com.au
Top
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Post by Micka »

amshaw wrote:
Micka wrote:Stop faffing about and just buy the bloody lift :roll: :finger:

Its not that big a deal. When you finally realise that you should have done a 3" lift and 2" body lift in the first place to fit the 37" tyres, you won't be worried about how much you spend.

Buy it. Flog it. :twisted:


Then go bigger :armsup:


Micka
"More money than brains" comes to mind :finger: :P ;)
Fark yeah :armsup: :D

All except for the money part :oops:
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 1 guest