Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hi Steer 80 series

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1477
Joined: Tue Mar 07, 2006 1:13 am
Location: The Gong

Contact:
Contact jimbo jones

Hi Steer 80 series

Post by jimbo jones »

Dose any one no if there is a Hi Steer avalible to lift the tie rod up and away from the front arms at the moment there's only about 4mm clearnce and I'm shoure it tuches every now and then. :?
current truck, 105 series GXL diesel 6" springs & twin pro lockers
sierra LWB spoa one wide track diffs twin locked

Sierra Parts Wanted pm me
Top
Posts: 182
Joined: Sun Jun 26, 2005 9:30 pm
Location: Port Hedland

Post by CruiserCruising »

I have seen this done i saw a bloke at blackrat this year who had just done it but i cant remember who it was sorry.
Top
Posts: 313
Joined: Mon Jul 05, 2004 6:34 pm
Location: East Kurrajong Sydney

Post by Coighty »

Hi steer will not fix your problem. To get clearance you need to flip the radius arms. Your steering is in front of your diff. And yes it probly does touch on full travel.
EFS Motorsport Extreme 4x4 susspension) www.efs4wd.com.au J-Mac Diff & Gear, Big Balls Motorsports, www.bbmotorsport.com.au WINDSOR MOTOR SMASH REPAIRS
Top
Posts: 1477
Joined: Tue Mar 07, 2006 1:13 am
Location: The Gong

Contact:
Contact jimbo jones

Post by jimbo jones »

Coighty wrote:Hi steer will not fix your problem. To get clearance you need to flip the radius arms. Your steering is in front of your diff. And yes it probly does touch on full travel.


I'm talking about the arm behind the diff that go's from hub to hub the tie rod
current truck, 105 series GXL diesel 6" springs & twin pro lockers
sierra LWB spoa one wide track diffs twin locked

Sierra Parts Wanted pm me
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Jimbo...take one arm off at a time and grind the casting marks off it where it is touching....that will give you enough....when the wheels are at full lock, it will touch....and wear the rear rod.a bit.
Andrew
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests