Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Modifying high mount winch drum...

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 477
Joined: Mon Mar 21, 2005 3:49 pm
Location: here

Modifying high mount winch drum...

Post by DanielS »

Hey guys,

Im currently building a bar for my GQ and I'm looking into modifying my winch drum to hold more rope. I have heard of some people making it wider by 150mm does this sound right?? If you have done this mod what have you done??

All info would be greatly appreciated.

Regards

Daniels
Top
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

yeah mate I did mine, pretty easy just make sure you part right through the weld or it may drop off later. I reduced the diameter as well for more torque on 2 line pulls, think i went 160 from memory

cheers bru
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Posts: 477
Joined: Mon Mar 21, 2005 3:49 pm
Location: here

Post by DanielS »

Thanks heaps for that info Bru. I will look into making it 160mm bigger.

Hope things are going well with your truck.

Daniels
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

DanielS wrote:Thanks heaps for that info Bru. I will look into making it 160mm bigger.

Daniels
Line may not play onto the ends of a wider drum unless roller fairlead widened by the same amount.

Bazzle
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests