Howdy,
Just wondering... is the diagnostic port under the steering wheel a standard OBDI or OBDII port?
Mate has an Audi with an ANSI OBDII port and an adpater and a little program that runs on his ipaq that displays lots of info.
I was wondering if you can do the same for the GU, interested in getting temperature readings out of it.
Anyone done this?
Regards.
g@z.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GU III 3.0l TDi Diagnostic port
My understanding is that the GU uses a Nissan CONSULT port... similar to the 200SX, silvia's etc..
The CONSULT port can be found under the Steering Column.
Australian Cars are not required to have an OBDII port.
Have a read here:
http://www.plmsdevelopments.com/consult_if.shtml
The CONSULT port can be found under the Steering Column.
Australian Cars are not required to have an OBDII port.
Have a read here:
http://www.plmsdevelopments.com/consult_if.shtml
Who is online
Users browsing this forum: No registered users and 0 guests