Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
To fit 265/75's easily, I would also look at a body lift for peace of mind. You will get them on, but like Micheal said,myou will still have guard rub problems.
I run 245/75R16 BFG all-terrains with a 2 inch King spring lift and a 25mm body lift, even on full upwards travel they occasionally hit up front on the guards. This hasn't stop me from fitting 235/8516 Goodyear wrangler MT/R's on the next tyre change (real soon!!) regardless of what the tyre blokes say!!
I have 33" MTR's on my 76 2 door with an Old Man Emu 2" spring lift, I had to cut the front and back of the front guards and the front of the back guards and they still just touch the top of both on full up-travel.
Thinking of puttin 33's on my 2 door. Have 31's that dont hit anywhere with zero offset rims and outer guard cut out. Thinking of spacing the bumpstops down an inch for the mean time instead of mucking around with a body lift. Any ideas? I know I will lose an inch of wheel travel but thats just bad luck!
No spring lift will stop tyer rub unless the prings are so long they bind up or the spring is rock hard both ways are unfeasable the only ways to stop tyer rub are:
1- body lift cheap and easy
2- cut gards out and by flairs
3- possible with skinner larger tyers that wheels spacers will help
4- Lower your bump stops :<
Putting bigger springs dose have marginal effect on tyer scub if you run the write rate springs, if your spring is to hard you might as well by a different 4x4 because articulation is about all the rangie has going for it and if you remove that it really is not much good any more. That is why leaf spring toyotas where made.
Jmcdonald wrote:because articulation is about all the rangie has going for it and if you remove that it really is not much good any more. That is why leaf spring toyotas where made.
shame on you
rangies have a lot going for them..
V8
COMFY armchair like seats
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
